Bevel cutter with bearing and high cutting length

Bevel cutter with bearing and high cutting length

Bevel cutter with bearing and high cutting length

Bevel cutter with bearing and high cutting length

Bevel cutter with bearing for solid surface

Bevel cutter with bearing for solid surface

Bevel cutter heavy duty

Bevel cutter heavy duty

Bevel cutter with high cutting length

Bevel cutter with high cutting length

Bevel cutter S=8 with high diameter

Bevel cutter S=8 with high diameter

Bevel cutter S=12 with high diameter

Bevel cutter S=12 with high diameter

Bevel cutter with bearing

Bevel cutter with bearing

Bevel cutter with real center cutting edge for direct...

Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.

For chamfering thin sheets, plywood, acrylic, etc. For...

For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.

Edge scraper 12,7 x 12,7 x 3,18 25 degrees Biesse Akron 1...

Edge scraper 12,7 x 12,7 x 3,18 25 degrees Biesse Akron 1 piece N3402N0097

Knife in HW 25 degrees CSEN700013

Knife in HW 25 degrees CSEN700013

Knife in HW 25 degrees CSEN700014

Knife in HW 25 degrees CSEN700014

Knife in HW R=1/2/25 degrees CSEN700025

Knife in HW R=1/2/25 degrees CSEN700025

Knife in HW R=1/2/25 degrees CSEN700026

Knife in HW R=1/2/25 degrees CSEN700026

LOW-NOISE 30° degrees pre-milling cutter 80x48x30+2KN...

LOW-NOISE 30° degrees pre-milling cutter 80x48x30+2KN   CCEN350128

LOW-NOISE 30° pre-milling cutter 80x65x30+2KN   CCEN350127

LOW-NOISE 30° pre-milling cutter 80x65x30+2KN   CCEN350127

RT01 Pre milling cutter DP 80x55x30+2KN CW CCEN350035

RT01 Pre milling cutter DP 80x55x30+2KN CW CCEN350035

Tilted fine trimmer 75x25x16+2KN R1.5/2/3/25° CCW N3401N0392

Tilted fine trimmer 75x25x16+2KN R1.5/2/3/25° CCW N3401N0392

Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CCW...

Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CCW N3401N0396

Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CW...

Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CW N3401N0395

Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CCW...

Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CCW N3401N0394

Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CW N3401N0393

Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CW N3401N0393

V-Groove cutter

V-Groove cutter

V-Groove cutter

V-Groove cutter

V-Groove cutter

V-Groove cutter

Wirutex RT01 Pre milling cutter DP 80x55x30+2KN CCW CCEN350036

Wirutex RT01 Pre milling cutter DP 80x55x30+2KN CCW CCEN350036