Bevel cutter 45° D44 S8mm
Bevel cutter S=8 with high diameter
Bevel cutter S=8 with high diameter
- -10%
- -10%
Filter By
Availability
Bore
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 49 products.
Bevel cutter S=8 with high diameter
Bevel cutter S=8 with high diameter
Bevel cutter with bearing for solid surface
Bevel cutter with bearing for solid surface
Bevel cutter heavy duty
Bevel cutter heavy duty
Bevel cutter heavy duty
Bevel cutter heavy duty
Bevel cutter with high cutting length
Bevel cutter with high cutting length
Bevel cutter S=8 with high diameter
Bevel cutter S=8 with high diameter
Bevel cutter S=12 with high diameter
Bevel cutter S=12 with high diameter
Bevel cutter S=12 with high diameter
Bevel cutter S=12 with high diameter
For folding, profiling and formatting in one operation.
For folding, profiling and formatting in one operation.
Bevel cutter with bearing
Bevel cutter with bearing
Bevel cutter with bearing
Bevel cutter with bearing
Bevel cutter with real center cutting edge for direct...
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
For chamfering thin sheets, plywood, acrylic, etc. For...
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
For chamfering thin sheets, plywood, acrylic, etc. For...
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
Bevel cutter for folding and chamfering wood, laminate and...
Bevel cutter for folding and chamfering wood, laminate and plastic sheets.
For use on twist drills with a 10 mm shank and a diameter of 4...
For use on twist drills with a 10 mm shank and a diameter of 4 mm to 10 mm.The countersinkis guided to the shank via the drill spiral and fastened there.
For use on twist drills with a 10 mm shank and a diameter of 4...
For use on twist drills with a 10 mm shank and a diameter of 4 mm to 10 mm.The countersinkis guided to the shank via the drill spiral and fastened there.
Double chamfering bit HW Z=2+2 A=45 degrees L=15 S=8
Double chamfering bit HW Z=2+2 A=45 degrees L=15 S=8
Double chamfering bit HW Z=2+2 A=45 degrees L=15 S=6
Double chamfering bit HW Z=2+2 A=45 degrees L=15 S=6
Adjustable Double chamfering bit with bearing 16 to 32 mm....
Adjustable Double chamfering bit with bearing 16 to 32 mm. Titman BCS38-12
Double rounding over / chamfer bit adjustable HW Z=2+2 D=22...
Double rounding over / chamfer bit adjustable HW Z=2+2 D=22 R=2,5 A=45 degrees Shank 12 mm
Double rounding over / chamfer bit adjustable HW Z=2+2 D=22...
Double rounding over / chamfer bit adjustable HW Z=2+2 D=22 R=2,5 A=45 degrees shank 8 mm
LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN CSEN350086
LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN CSEN350086
Miniature bevel cutter with bearing 45 degrees
Miniature bevel cutter with bearing 45 degrees
Miniature bevel cutter with bearing 45 degrees
Miniature bevel cutter with bearing 45 degrees
Miniature bevel cutter with bearing 45 degrees
Miniature bevel cutter with bearing 45 degrees
Replacement tip bevel cutter shank 25 mm
Replacement tip bevel cutter shank 25 mm
Replacement tip bevel cutter shank 25 mm
Replacement tip bevel cutter shank 25 mm