Adapter External thread to shank

Adapter External thread to shank

Ball nose Spiral cutter Z1 Positive - Upcut for Plastics...

Ball nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Ball nose Spiral cutter Z1 Positive - Upcut for Plastics...

Ball nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10

Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10

S = M10x1,5 mm D = 18 mmL = 25 mmGL = 50 mm

S = M10x1,5 mm D = 18 mmL = 25 mmGL = 50 mm

S = M10x1,5 mm D = 18 mmL = 25 mmGL = 50 mm

S = M10x1,5 mm D = 18 mmL = 25 mmGL = 50 mm

Finger pull Cutters

Finger pull Cutters

Finishing cutter for through-hole milling Z3 For spy hole...

Finishing cutter for through-hole milling Z3 For spy hole milling and through holes

Guttering cutter

Guttering cutter

Guttering cutter

Guttering cutter

Guttering cutter

Guttering cutter

Lock case cutter rough toothing Z=3

Lock case cutter rough toothing Z=3

For contouring, boring and sizing panels in chipboard and MDF,...

For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.

For contouring, boring and sizing panels in chipboard and MDF,...

For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.

For contouring, boring and sizing panels in chipboard and MDF,...

For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.

Profile mould cutter for hand holes in solid material

Profile mould cutter for hand holes in solid material

Replacement tip bearing guide cutter. For coated boards, solid...

Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials

Roughing cutter for through-hole milling Z3 For pusher hole...

Roughing cutter for through-hole milling Z3 For pusher hole drilling and lock cylinder milling

Rounding over cutter R15 S=10mm

Rounding over cutter R15 S=10mm

Rounding over cutter R10 S=10mm

Rounding over cutter R10 S=10mm

Rounding over cutter R=8 S=10 mm

Rounding over cutter R=8 S=10 mm

Single flute cutter with neck for plastic and aluminium

Single flute cutter with neck for plastic and aluminium

Single flute cutter with neck for plastic and aluminium

Single flute cutter with neck for plastic and aluminium

Single flute cutter with neck for plastic and aluminium

Single flute cutter with neck for plastic and aluminium

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

Solid carbide milling cutter with rounded chip chamber and...

Solid carbide milling cutter with rounded chip chamber and mirror grinding. Optimized cutting geometry for processing all non-ferrous metals.

Solid carbide milling cutter with rounded chip chamber and...

Solid carbide milling cutter with rounded chip chamber and mirror grinding. Optimized cutting geometry for processing all non-ferrous metals.

Solid carbide milling cutter with rounded chip chamber and...

Solid carbide milling cutter with rounded chip chamber and mirror grinding. Optimized cutting geometry for processing all non-ferrous metals.