Arbor inclusive spacers and bearing no. B16 (D = 16). Suitable...

Arbor inclusive spacers and bearing no. B16 (D = 16). Suitable for groovers with bore 6,35 mm

Ball nose Spiral cutter Z1 Positive - Upcut for Plastics...

Ball nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Ball nose Spiral cutter Z1 Positive - Upcut for Plastics...

Ball nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Bevel cutter with bearing

Bevel cutter with bearing

Bevel cutter with bearing

Bevel cutter with bearing

For chamfering thin sheets, plywood, acrylic, etc. For...

For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.

Bevel cutter for folding and chamfering wood, laminate and...

Bevel cutter for folding and chamfering wood, laminate and plastic sheets.

Straight bit shank 6 mm

Straight bit shank 6 mm

Double chamfering bit HW Z=2+2 A=45 degrees L=15 S=6

Double chamfering bit HW Z=2+2 A=45 degrees L=15 S=6

Engraving cutter for plastics Z1  Suitable for:...

Engraving cutter for plastics Z1  Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Engraving cutter for plastics Z1  Suitable for:...

Engraving cutter for plastics Z1  Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Guide and trim

Guide and trim

Guttering cutter

Guttering cutter

Guttering cutter

Guttering cutter

Guttering cutter

Guttering cutter

Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=6mm

Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=6mm

Miniature bevel cutter with bearing 45 degrees

Miniature bevel cutter with bearing 45 degrees

Profile cutter TRC19

Profile cutter TRC19

Trimming cutter with bearing on shank for scanning overhead...

Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.

Trimming cutter with bearing on shank for scanning overhead...

Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.

Profile guide cutter with bearing on shank

Profile guide cutter with bearing on shank

Radius engraving cutter These double-edged cutters create a...

Radius engraving cutter These double-edged cutters create a flat of approx. 1 mm at the bottom.