Double flute milling cutter for plastic and aluminium

Double flute milling cutter for plastic and aluminium

Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8

Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8

Dovetail bit HW Z=2 D=12 A=10° L=10 GL=46 S=8

Dovetail bit HW Z=2 D=12 A=10° L=10 GL=46 S=8

For drill bits with 10 mm shank and clamping surface. Suitable...

For drill bits with 10 mm shank and clamping surface. Suitable for machines from: Albert, SCM, Schleicher, Vitap, Balestrini, Ombe, Bilek S = M10x1,5 mmD = 19 mmA = 15°L = 20 mmGL = 46 mm

For drill bits with 10 mm shank and clamping surface. Suitable...

For drill bits with 10 mm shank and clamping surface. Suitable for machines from: Albert, SCM, Schleicher, Vitap, Balestrini, Ombe, Bilek S = M10x1,5 mmD = 19 mmA = 15°L = 20 mmGL = 46 mm

Finishing cutter for through-hole milling Z3 For spy hole...

Finishing cutter for through-hole milling Z3 For spy hole milling and through holes

Finishing cutter for through-hole milling Z3 For spy hole...

Finishing cutter for through-hole milling Z3 For spy hole milling and through holes

Finishing cutter for through-hole milling Z3 For spy hole...

Finishing cutter for through-hole milling Z3 For spy hole milling and through holes

Guttering cutter

Guttering cutter

Profile cutter BGC58

Profile cutter BGC58

Profile cutter CLT4

Profile cutter CLT4

Profile cutter OG

Profile cutter OG

Radius engraving cutter These double-edged cutters create a...

Radius engraving cutter These double-edged cutters create a flat of approx. 1 mm at the bottom.

Radius engraving cutter These double-edged cutters create a...

Radius engraving cutter These double-edged cutters create a flat of approx. 1 mm at the bottom.

Radius engraving cutter These double-edged cutters create a...

Radius engraving cutter These double-edged cutters create a flat of approx. 1 mm at the bottom.

Roughing cutter for through-hole milling Z3 For pusher hole...

Roughing cutter for through-hole milling Z3 For pusher hole drilling and lock cylinder milling

Roughing cutter for through-hole milling Z3 For pusher hole...

Roughing cutter for through-hole milling Z3 For pusher hole drilling and lock cylinder milling

Roughing cutter for through-hole milling Z3 For pusher hole...

Roughing cutter for through-hole milling Z3 For pusher hole drilling and lock cylinder milling

Rounding over cutter R6.3  S8mm

Rounding over cutter R6.3  S8mm

Single flute cutter with neck for plastic and aluminium

Single flute cutter with neck for plastic and aluminium

Single flute cutter with neck for plastic and aluminium

Single flute cutter with neck for plastic and aluminium

Single flute cutter with neck for plastic and aluminium

Single flute cutter with neck for plastic and aluminium

Single flute cutter with neck for plastic and aluminium

Single flute cutter with neck for plastic and aluminium

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

Spiral cutter Z1 Negative - Down cut for Plastics Suitable...

Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)