Bevel cutter 10° S8mm...
Bevel cutter with bearing and high cutting length
Bevel cutter with bearing and high cutting length
- -10%
- -10%
Filter By
Availability
inner diameter
Outside diameter
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 27 products.
Bevel cutter with bearing and high cutting length
Bevel cutter with bearing and high cutting length
Bevel cutter with bearing and high cutting length
Bevel cutter with bearing and high cutting length
Bevel cutter for repair work on solid surface material
Bevel cutter for repair work on solid surface material
Bevel cutter for repair work on solid surface material
Bevel cutter for repair work on solid surface material
Bevel cutter for repair work on solid surface material
Bevel cutter for repair work on solid surface material
Engraving cutter 60°
Engraving cutter 60°
Half round profile cutter
Half round profile cutter
Pattern bit Z=2 D=19 L=12 S=8
Pattern bit Z=2 D=19 L=12 S=8
Trimming cutter with bearing on shank for scanning overhead...
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
Trimming cutter with bearing on shank for scanning overhead...
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
Trimming cutter with bearing on shank for scanning overhead...
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
Profile mould cutter for hand holes in solid material
Profile mould cutter for hand holes in solid material
Profile mould cutter for hand holes in solid material
Profile mould cutter for hand holes in solid material
Profile mould cutter for hand holes in solid material
Profile mould cutter for hand holes in solid material
Reduction sleeve 6 -10 mm
Reduction sleeve 6 -10 mm
Reduction sleeve 6 - 8mm
Reduction sleeve 6 - 8mm
Reduction sleeve 10-12mm
Reduction sleeve 10-12mm
Reduction sleeve 6 - 12 mm
Reduction sleeve 6 - 12 mm
Reduction sleeve 8 - 10 mm
Reduction sleeve 8 - 10 mm
Reduction sleeve 8-12 mm
Reduction sleeve 8-12 mm
Solid carbide milling cutter with rounded chip chamber and...
Solid carbide milling cutter with rounded chip chamber and mirror grinding. Optimized cutting geometry for processing all non-ferrous metals.
Solid carbide milling cutter with rounded chip chamber and...
Solid carbide milling cutter with rounded chip chamber and mirror grinding. Optimized cutting geometry for processing all non-ferrous metals.
Spiral cutter Z2 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z2 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight cutter for Plastics Suitable for: Acrylonitrile...
Straight cutter for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic, Plexi etc.)
Trimmers with bearing top and bottom
Trimmers with bearing top and bottom