Arbor for UG groovers (internal thread M12x1)For bearings with...

Arbor for UG groovers (internal thread M12x1)For bearings with bore 12 mm Arbors with shank 8 mm are only approved for groovers up to L6 mm.

Ball nose Spiral cutter Z1 Positive - Upcut for Plastics...

Ball nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Ball nose Spiral cutter Z1 Positive - Upcut for Plastics...

Ball nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Bevel cutter S=12 with high diameter

Bevel cutter S=12 with high diameter

Bevel cutter S=12 with high diameter

Bevel cutter S=12 with high diameter

T-Slot cutter

T-Slot cutter

Coving cutter with 90 degrees tangential outlet for solid surface

Coving cutter with 90 degrees tangential outlet for solid surface

Face milling bit D=80 L=12 S=16mm

Face milling bit D=80 L=12 S=16mm

Finger joint cutter GJ1

Finger joint cutter GJ1

Half round profile cutter

Half round profile cutter

Titman rounding over cutter R=2 S=8

Titman rounding over cutter R=2 S=8

For CNC machines For Cabinet nesting Machinig operations on...

For CNC machines For Cabinet nesting Machinig operations on MDF and melamine DP plunging Tip Sharpening area 2.0 mm heavy metal body Feed speed up to 20m/min

For contouring, boring and sizing panels in chipboard and MDF,...

For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.

For contouring, boring and sizing panels in chipboard and MDF,...

For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.

For contouring, boring and sizing panels in chipboard and MDF,...

For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.

For milling thin-walled panels in caravan construction

For milling thin-walled panels in caravan construction

For milling thin-walled panels in caravan construction

For milling thin-walled panels in caravan construction

Profile cutter OG  D9,5 S8mm

Profile cutter OG  D9,5 S8mm

Trimming cutter with bearing on shank for scanning overhead...

Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.

Profile guide cutter with bearing on shank

Profile guide cutter with bearing on shank

Profile guide cutter with bearing on shank

Profile guide cutter with bearing on shank

D19 L30 S8mm Replacement tip trimmers with bearing top and bottom

D19 L30 S8mm Replacement tip trimmers with bearing top and bottom

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.