Arbors for UG groovers for...
Arbor for UG groovers (internal thread M12x1)For bearings with...
Arbor for UG groovers (internal thread M12x1)For bearings with bore 12 mm Arbors with shank 8 mm are only approved for groovers up to L6 mm.
- -10%
- -10%
Filter By
Availability
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 85 products.
Arbor for UG groovers (internal thread M12x1)For bearings with...
Arbor for UG groovers (internal thread M12x1)For bearings with bore 12 mm Arbors with shank 8 mm are only approved for groovers up to L6 mm.
Ball nose Spiral cutter Z1 Positive - Upcut for Plastics...
Ball nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Ball nose Spiral cutter Z1 Positive - Upcut for Plastics...
Ball nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Barley twist cutter BTC3
Barley twist cutter BTC3
Bevel cutter S=12 with high diameter
Bevel cutter S=12 with high diameter
Bevel cutter S=12 with high diameter
Bevel cutter S=12 with high diameter
Cove mould cutter with bearing
Cove mould cutter with bearing
Coving cutter with 90 degrees tangential outlet for solid surface
Coving cutter with 90 degrees tangential outlet for solid surface
Engraving cutter 80° Shank 8mm
Engraving cutter 80° Shank 8mm
Face milling bit D=80 L=12 S=16mm
Face milling bit D=80 L=12 S=16mm
Finger joint cutter GJ1
Finger joint cutter GJ1
Half round profile cutter
Half round profile cutter
For CNC machines For Cabinet nesting Machinig operations on...
For CNC machines For Cabinet nesting Machinig operations on MDF and melamine DP plunging Tip Sharpening area 2.0 mm heavy metal body Feed speed up to 20m/min
For contouring, boring and sizing panels in chipboard and MDF,...
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
For contouring, boring and sizing panels in chipboard and MDF,...
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
For contouring, boring and sizing panels in chipboard and MDF,...
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
For milling thin-walled panels in caravan construction
For milling thin-walled panels in caravan construction
For milling thin-walled panels in caravan construction
For milling thin-walled panels in caravan construction
Trimming cutter with bearing on shank for scanning overhead...
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
Profile guide cutter with bearing on shank
Profile guide cutter with bearing on shank
Profile guide cutter with bearing on shank
Profile guide cutter with bearing on shank
D19 L30 S8mm Replacement tip trimmers with bearing top and bottom
D19 L30 S8mm Replacement tip trimmers with bearing top and bottom
Shallow finger pull cutter
Shallow finger pull cutter
Spiral cutter Z2 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z2 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Spiral cutter Z2 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z2 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)