Arbors for UG groovers...
Arbor for UG groovers (internal thread M12x1)For bearings with...
Arbor for UG groovers (internal thread M12x1)For bearings with bore 12 mm
- -10%
- -10%
Filter By
Availability
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 34 products.
Arbor for UG groovers (internal thread M12x1)For bearings with...
Arbor for UG groovers (internal thread M12x1)For bearings with bore 12 mm
Bearing guide trimmer Z2 for solid surface Suitable for...
Bearing guide trimmer Z2 for solid surface Suitable for Corian Hi-Macs Staron Avonite Hanex Varicor domovari
Bevel cutter with bearing and high cutting length
Bevel cutter with bearing and high cutting length
Bevel cutter with bearing and high cutting length
Bevel cutter with bearing and high cutting length
Bevel cutter with bearing and high cutting length
Bevel cutter with bearing and high cutting length
Bevel cutter with bearing and high cutting length
Bevel cutter with bearing and high cutting length
Guttering cutter with high cutting length 12 mm Shank
Guttering cutter with high cutting length 12 mm Shank
Guttering cutter with high cutting length 12 mm Shank
Guttering cutter with high cutting length 12 mm Shank
Guttering cutter with high cutting length 12 mm Shank
Guttering cutter with high cutting length 12 mm Shank
Guttering cutter with high cutting length 12 mm Shank
Guttering cutter with high cutting length 12 mm Shank
Guttering cutter with high cutting length 12 mm Shank
Guttering cutter with high cutting length 12 mm Shank
For CNC machines For Cabinet nesting Machinig operations on...
For CNC machines For Cabinet nesting Machinig operations on MDF and melamine DP plunging Tip Sharpening area 2.0 mm heavy metal body Feed speed up to 20m/min
Trimming cutter with bearing on shank for scanning overhead...
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
For CNC machines For Cabinet nesting Machinig operations on...
For CNC machines For Cabinet nesting Machinig operations on MDF and melamine DP plunging Tip Sharpening area 2.0 mm heavy metal body Feed speed up to 20m/min
Single flute cutter Z=2 Negative for solid surface
Single flute cutter Z=2 Negative for solid surface
Single flute cutter Z=2 Negative for solid surface
Single flute cutter Z=2 Negative for solid surface
Spiral finishing cutter downcut Z3
Spiral finishing cutter downcut Z3
Straight bit Z=2 D=19 L=20 S=12
Straight bit Z=2 D=19 L=20 S=12
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm