Ball nose Spiral cutter Z1 Positive - Upcut for Plastics...

Ball nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Ball nose Spiral cutter Z1 Positive - Upcut for Plastics...

Ball nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Barley twist cutter BTC2

Barley twist cutter BTC2

Barley twist cutter BTC6

Barley twist cutter BTC6

Bevel cutter with beveled bearing for solid surface

Bevel cutter with beveled bearing for solid surface

For chamfering thin sheets, plywood, acrylic, etc. For...

For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.

Adjustable Double chamfering bit with bearing 16 to 32 mm....

Adjustable Double chamfering bit with bearing 16 to 32 mm. Titman BCS38-12

For drill bits with 10 mm shank and clamping surface. Suitable...

For drill bits with 10 mm shank and clamping surface. Suitable for machines from: Morbidelli, Biesse, Weeke, Reimall, Torwegge, Busellato, Bottcher, Gessner, Ayen S = M10x1,5 mmD = 19 mmL = 31 mmGL = 47 mm

For drill bits with 10 mm shank and clamping surface. Suitable...

For drill bits with 10 mm shank and clamping surface. Suitable for machines from: Morbidelli, Biesse, Weeke, Reimall, Torwegge, Busellato, Bottcher, Gessner, Ayen S = M10x1,5 mmD = 19 mmL = 31 mmGL = 47 mm

EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8

EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8

Finger pull Cutters

Finger pull Cutters

Finger pull Cutters

Finger pull Cutters

Finger pull Cutters

Finger pull Cutters

Guttering cutter

Guttering cutter

Guttering cutter

Guttering cutter

Guttering cutter

Guttering cutter

Guttering cutter

Guttering cutter

For contouring, boring and sizing panels in chipboard and MDF,...

For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.

For contouring, boring and sizing panels in chipboard and MDF,...

For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.

Profile cutter CDC48

Profile cutter CDC48

Profile cutter RBB

Profile cutter RBB

Profile cutter SBBC2

Profile cutter SBBC2

Profile cutter SBBC3

Profile cutter SBBC3

Profile cutter SBBC5

Profile cutter SBBC5

for simultaneous machining of top and bottom edges.

for simultaneous machining of top and bottom edges.

Replacement tip bearing guide cutter. For coated boards, solid...

Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials