Premium Half round cutter
Premium Half round cutter
Replacement tip Straight bit Z=2 Shank 12 mm
Replacement tip Straight bit Z=2 Shank 12 mm
Replacement tip Straight bit Z=2 S=8
Replacement tip Straight bit Z=2 S=8
Replacement tip Straight bit Z=2 Shank 12 mm
Replacement tip Straight bit Z=2 Shank 12 mm
Replacement tip Straight bit Z=2 Shank 12 mm
Replacement tip Straight bit Z=2 Shank 12 mm
Slat wall cutter Arkwall
Slat wall cutter Arkwall
Slat wall cutter Deko-Wall 88 Cutter suitable for the profile...
Slat wall cutter Deko-Wall 88 Cutter suitable for the profile rail Deco-Wall 88 from HÄFELE.
Replacement tip Straight bit Z=2 S=8
Replacement tip Straight bit Z=2 S=8
Face milling bit diameter 45 mm Titman FMC45-12RT
Face milling bit diameter 45 mm Titman FMC45-12RT
Bevel cutter with high cutting length
Bevel cutter with high cutting length
Slat wall cutter Harres Cutter suitable for the profile rail...
Slat wall cutter Harres Cutter suitable for the profile rail HARRES
Replacement tip Straight bit Z=2 Shank 12 mm
Replacement tip Straight bit Z=2 Shank 12 mm
Bevel cutter with bearing and high cutting length
Bevel cutter with bearing and high cutting length
Slat wall cutter with Radius
Slat wall cutter with Radius
Replacement tip straight cutter internal thread M12x1
Replacement tip straight cutter internal thread M12x1
Replacement tip straight cutter internal thread M12x1
Replacement tip straight cutter internal thread M12x1
Cutter combination for milling grooves for flashover seals.
Cutter combination for milling grooves for flashover seals.
D19 L50 S12mm Replacement tip trimmers with bearing top and...
D19 L50 S12mm Replacement tip trimmers with bearing top and bottom
Raised panel cutter RPC5
Raised panel cutter RPC5
Raised panel cutter RPC3
Raised panel cutter RPC3
Raised panel cutter RPC2
Raised panel cutter RPC2
Spiral finishing cutter upcut Z3
Spiral finishing cutter upcut Z3
Premium Half round cutter
Premium Half round cutter
For solid handles and pulls on kitchen and wall unit doors,...
For solid handles and pulls on kitchen and wall unit doors, the perfect solutions for providing positive grips and softened, easy-on-the-fingers edges without the need for external hardware.
Adjustable groover 3 to 5 mm. The height adjustment is carried...
Adjustable groover 3 to 5 mm. The height adjustment is carried out by means of the enclosed spacers.
for simultaneous machining of top and bottom edges.
for simultaneous machining of top and bottom edges.
for simultaneous machining of top and bottom edges.
for simultaneous machining of top and bottom edges.
Spiral finishing cutter upcut Z2
Spiral finishing cutter upcut Z2
Adjustable groover 5 to 9mm. The height adjustment is carried...
Adjustable groover 5 to 9mm. The height adjustment is carried out by means of the enclosed spacers.
