Ofertas
Barley twist cutter BTC3
Agotado, consultar plazo de entrega.
149,00 €
-20%
119,20 €
Para manijas y tiradores sólidos en puertas de muebles de cocina y de pared, las soluciones perfectas para proporcionar agarres positivos y bordes suaves y agradables para los dedos sin necesidad de herrajes externos.
Agotado, consultar plazo de entrega.
215,00 €
-20%
172,00 €
Para mecanizado de precisión en centros de mecanizado CNC
Mecanizado de tableros de partículas o MDF, tanto laminados como en bruto, con película de melamina, HPL, laminados y contrachapado.
Punta de diamante
Cuerpo de metal resistente
Área de afilado: 2,0 mm
Velocidad de avance: hasta 25 m/min
Espesor del panel: 20-22 mm
L2 = 25 mm
L4 = 18 mm
L5 = 39 mm
Mecanizado de tableros de partículas o MDF, tanto laminados como en bruto, con película de melamina, HPL, laminados y contrachapado.
Punta de diamante
Cuerpo de metal resistente
Área de afilado: 2,0 mm
Velocidad de avance: hasta 25 m/min
Espesor del panel: 20-22 mm
L2 = 25 mm
L4 = 18 mm
L5 = 39 mm
Tiempo de entrega estimado de 1 a 2 semanas.
950,00 €
-20%
760,00 €
Cove mould cutter with bearing
Agotado, consultar plazo de entrega.
160,00 €
-20%
128,00 €
Engraving cutter 80° Shank 8mm
1 en stock
86,00 €
-20%
68,80 €
ENT trimming cutter TC 9.5 x 25.4 x 68 mm with 8mm shank
2 en stock
28,00 €
-25%
21,00 €
Incluye dos rodamientos de bolas de 16 mm y 12,7 mm de diámetro.
Rodamiento de bolas B16 montado para redondeo.
Rodamiento de bolas B16 montado para redondeo.
1 en stock
170,07 €
-20%
136,06 €
Half round profile cutter
Agotado, consultar plazo de entrega.
145,00 €
-20%
116,00 €
1 en stock
140,00 €
-20%
112,00 €
1 en stock
160,00 €
-20%
128,00 €
Shallow finger pull cutter
Agotado, consultar plazo de entrega.
227,00 €
-20%
181,60 €
D8 L20 S8mm
1 en stock
29,00 €
-20%
23,20 €
D8 L20 S8mm
1 en stock
29,00 €
-20%
23,20 €
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
20,00 €
-20%
16,00 €
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
29,00 €
-20%
23,20 €
D8 L20 S8mm
2 en stock
29,00 €
-20%
23,20 €
Straight bit shank 12 mm
Agotado, consultar plazo de entrega.
48,00 €
-20%
38,40 €
Straight bit shank 12 mm
Agotado, consultar plazo de entrega.
56,00 €
-20%
44,80 €
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
1 en stock
24,00 €
-25%
18,00 €
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
1 en stock
26,00 €
-25%
19,50 €
T-Slot cutter
Agotado, consultar plazo de entrega.
115,00 €
-20%
92,00 €
Straight cutter for plastic
Suitable for plastics with a low melting point.
In-boring and clockwise rotation
Suitable for plastics with a low melting point.
In-boring and clockwise rotation
4 en stock
26,00 €
-20%
20,80 €