JVL pro-line roundnose bit...
JVL pro-line roundnose bit D 19 mm
JVL pro-line roundnose bit D 19 mm
Filtrar por
Disponibilidad
Diámetro de conexión
Diámetro (D)
Longitud del cortador - altura
Largo total
Radio/ángulo
Cortadores
Amplio programa de fresadoras profesionales para un resultado perfecto.
Hay 70 productos.
JVL pro-line roundnose bit D 19 mm
JVL pro-line roundnose bit D 19 mm
ENT trimming cutter TC 19 x 19 x 62 mm with 8mm shank
ENT trimming cutter TC 19 x 19 x 62 mm with 8mm shank
Straight bit shank 8mm
Straight bit shank 8mm
Dovetail bit HW Z=2 D=14 A=10° L=12 GL=49 S=8mm
Dovetail bit HW Z=2 D=14 A=10° L=12 GL=49 S=8mm
Adecuado para: Acero, Acero inoxidable, Hierro fundido,...
Adecuado para: Acero, Acero inoxidable, Hierro fundido, Aluminio y cobre
Straight cutter with two flutes for clean finish. For...
Straight cutter with two flutes for clean finish. For grooving, rebating and mortising. With TC centre tip. The TC centre tip is ideal for plunging and working in abrasive materials such as chipboard, MDF, plywood and hardwood.
Straight bit shank 8mm
Straight bit shank 8mm
Water channel cutter with bearing
Water channel cutter with bearing
Straight bit shank 8mm
Straight bit shank 8mm
Replacement tip bearing guide cutter. For coated boards, solid...
Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials
Straight bit shank 8mm
Straight bit shank 8mm
Bearing guide trimmer Z2 for solid surface Suitable for...
Bearing guide trimmer Z2 for solid surface Suitable for Corian Hi-Macs Staron Avonite Hanex Varicor domovari
Straight bit shank 12 mm
Straight bit shank 12 mm
Miniature bevel cutter with bearing 45 degrees
Miniature bevel cutter with bearing 45 degrees
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Bevel cutter with real center cutting edge for direct...
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Trimming cutter with bearing on shank for scanning overhead...
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
Trimmers with bearing top and bottom
Trimmers with bearing top and bottom
Rounding over cutter R4 S8mm
Rounding over cutter R4 S8mm
Rounding over cutter R4 S=6mm
Rounding over cutter R4 S=6mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Trimming Cutter TC with Shear Cutting Angle and 12 mm shank...
Trimming Cutter TC with Shear Cutting Angle and 12 mm shank ENT 13465
Titman rounding over cutter R3 S8
Titman rounding over cutter R3 S8