Filtrar por

Disponibilidad

Diámetro de conexión

Diámetro (D)

Longitud del cortador - altura

Largo total

Radio/ángulo

Cortadores

Fresadoras / CNC

Amplio programa de fresadoras profesionales para un resultado perfecto.

Filtros activos

  • Diámetro (D): 2mm
  • Diámetro (D): 16 mm
BT4 2,0x40 BT4 2,0x40

BT4 2,0x40

Adecuado para: Acero, Acero inoxidable, Hierro fundido,...

Adecuado para: Acero, Acero inoxidable, Hierro fundido, aluminio, cobre y plásticos

Precio 10,00 €
ST2 2 x 40 ST2 2 x 40

ST2 2 x 40

Adecuado para: Acero, Acero inoxidable, Hierro fundido,...

Adecuado para: Acero, Acero inoxidable, Hierro fundido, Aluminio y cobre

Precio 10,90 €
ST4 2,0 x 40 ST4 2,0 x 40

ST4 2,0 x 40

Adecuado para: Acero, Acero inoxidable, Hierro fundido,...

Adecuado para: Acero, Acero inoxidable, Hierro fundido, Aluminio y cobre

Precio 11,00 €
Spiral cutter Negative for Plastics D2 L8 S3mm

Spiral cutter Negative for...

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Precio 13,50 € Precio base 15,00 €
  • -10%
  • -10%
VHMS 2,0x6x64mm VHMS 2,0x6x64mm

VHMS 2,0x6x64mm

Adecuado para: Acero, Acero inoxidable, Hierro fundido,...

Adecuado para: Acero, Acero inoxidable, Hierro fundido, CO-superalloys, NI-superalloys, TI-superalloys

Precio 20,00 €
Straight Cutter TC Z2 D16 S8mm

Straight Cutter TC Z2 D16...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

Precio 24,00 €
EPROCUT EPROCUT Top bearing straight bit HW Z2 D16 L20 GL67 S8

EPROCUT EPROCUT Top bearing...

EPROCUT EPROCUT Top bearing straight bit HW Z=2 D=16 L=20...

EPROCUT EPROCUT Top bearing straight bit HW Z=2 D=16 L=20 GL=67 S=8

Precio 25,20 € Precio base 28,00 €
  • -10%
  • -10%
Straight Cutter TC Z2 D16 L32 S8mm

Straight Cutter TC Z2 D16...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

Precio 26,00 €
EPROCUT Top bearing straight bits HW Z2 D16 L25 GL72 S8

EPROCUT Top bearing...

EPROCUT Top bearing straight bits HW Z=2 D=16 L=25 GL=72 S=8

EPROCUT Top bearing straight bits HW Z=2 D=16 L=25 GL=72 S=8

Precio 27,90 € Precio base 31,00 €
  • -10%
  • -10%
Spiral cutter Z1 Negative - Down cut D2 L6 S3 mm

Spiral cutter Z1 Negative -...

Spiral cutter Z1 Negative - Down cut for Plastics Suitable...

Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Precio 30,60 € Precio base 34,00 €
  • -10%
  • -10%
Spiral cutter Z1 Positive - Upcut D2 L9 S3mm

Spiral cutter Z1 Positive -...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Precio 30,60 € Precio base 34,00 €
  • -10%
  • -10%
Spiral cutter Z1 Positive - Upcut D2 L6 S3mm

Spiral cutter Z1 Positive -...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Precio 30,60 € Precio base 34,00 €
  • -10%
  • -10%
AS2 16,0x92 AS2 16,0x92

AS2 16,0x92

Adecuado para: aluminio, cobre, plásticos.

Adecuado para: aluminio, cobre, plásticos.

Precio 35,00 €
Spiral cutter for aluminium Z2 D2 L8 S3mm

Spiral cutter for aluminium...

Solid carbide milling cutter with rounded chip chamber and...

Solid carbide milling cutter with rounded chip chamber and mirror grinding.Optimized cutting geometry for processing all non-ferrous metals.

Precio 36,00 € Precio base 40,00 €
  • -10%
  • -10%
ENT trimming cutter top ball bearing 16 x 19 mm

ENT trimming cutter top...

Bottom cutting. suitable for plunge. With 8 mm shank

Bottom cutting. suitable for plunge. With 8 mm shank

Precio 49,00 €
Profile guide cutter D16 L20 S8mm

Profile guide cutter D16...

Trimming cutter with bearing on shank for scanning overhead...

Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.

Precio 53,10 € Precio base 59,00 €
  • -10%
  • -10%
Volver arriba