Filtrar por
Disponibilidad
Diámetro de conexión
Diámetro (D)
Longitud del cortador - altura
Largo total
Radio/ángulo
Cortadores
Amplio programa de fresadoras profesionales para un resultado perfecto.
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Face milling bit HW Z=2 D=20 L=13 GL=45 S=8
Face milling bit HW Z=2 D=20 L=13 GL=45 S=8
Straight bit shank 8mm
Straight bit shank 8mm
Adecuado para: aluminio, cobre, plásticos.
Adecuado para: aluminio, cobre, plásticos.
Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10
Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10
Straight bit shank 8mm
Straight bit shank 8mm
V-Groove cutter 90° S8mm for ALUCOBOND, DiBOND, REYNOBOND
V-Groove cutter 90° S8mm for ALUCOBOND, DiBOND, REYNOBOND
For milling a shadow gap or water surge at the basin and water...
For milling a shadow gap or water surge at the basin and water drainage channels on the sink.
Straight bit shank 8mm
Straight bit shank 8mm
V-Groove cutter 108° S8mm for ALUCOBOND, DiBOND, REYNOBOND
V-Groove cutter 108° S8mm for ALUCOBOND, DiBOND, REYNOBOND
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Ballbearings diameter 16 mm and 12,7 mm included.
Ballbearings diameter 16 mm and 12,7 mm included.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Titman Staff / corner bead bit with bearing HW Z=2 D=20 L=12...
Titman Staff / corner bead bit with bearing HW Z=2 D=20 L=12 R=2 S=8
Straight bit shank 8mm
Straight bit shank 8mm
Radius engraving cutter These double-edged cutters create a...
Radius engraving cutter These double-edged cutters create a flat of approx. 1 mm at the bottom.
Straight bit shank 8mm
Straight bit shank 8mm
Trimming bevel cutter with bearing
Trimming bevel cutter with bearing
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Ballbearings diameter 16 mm and 12,7 mm included.
Ballbearings diameter 16 mm and 12,7 mm included.
PCD Diamond straight router bit bottom cutting
PCD Diamond straight router bit bottom cutting
Straight bit shank 12 mm
Straight bit shank 12 mm
Coving cutter with 90 degrees tangential outlet for solid surface
Coving cutter with 90 degrees tangential outlet for solid surface
