Filtrar por

Disponibilidad

Diámetro de conexión

Diámetro (D)

Longitud del cortador - altura

Largo total

Radio/ángulo

Cortadores

Fresadoras / CNC

Amplio programa de fresadoras profesionales para un resultado perfecto.

Filtros activos

  • Diámetro (D): 2,5mm
  • Diámetro (D): 25mm
BT4 2,5x40 BT4 2,5x40

BT4 2,5x40

Adecuado para: Acero, Acero inoxidable, Hierro fundido,...

Adecuado para: Acero, Acero inoxidable, Hierro fundido, aluminio, cobre y plásticos

Precio 11,00 €
BT2 2,5x40 BT2 2,5x40

BT2 2,5x40

Adecuado para: Acero, Acero inoxidable, Hierro fundido,...

Adecuado para: Acero, Acero inoxidable, Hierro fundido, aluminio, cobre y plásticos

Precio 11,00 €
ST2 2,5 x 40 ST2 2,5 x 40

ST2 2,5 x 40

Adecuado para: Acero, Acero inoxidable, Hierro fundido,...

Adecuado para: Acero, Acero inoxidable, Hierro fundido, Aluminio y cobre

Precio 11,00 €
ST4 2,5 x 40 ST4 2,5 x 40

ST4 2,5 x 40

Adecuado para: Acero, Acero inoxidable, Hierro fundido,...

Adecuado para: Acero, Acero inoxidable, Hierro fundido, Aluminio y cobre

Precio 12,00 €
ST3 2,5 x 40 ST3 2,5 x 40

ST3 2,5 x 40

Adecuado para: Acero, Acero inoxidable, Hierro fundido,...

Adecuado para: Acero, Acero inoxidable, Hierro fundido, Aluminio y cobre

Precio 15,00 €
Spiral cutter Negative for Plastics D2,5 L10 S3mm

Spiral cutter Negative for...

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Precio 15,30 € Precio base 17,00 €
  • -10%
  • -10%
Spiral cutter Positiv for Plastics D2,5 L10 S3mm

Spiral cutter Positiv for...

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Precio 15,30 € Precio base 17,00 €
  • -10%
  • -10%
Straight Cutter with Centre Tip 25 x 20 x 52 mm

Straight Cutter with Centre...

Straight cutter with two flutes for clean finish. For...

Straight cutter with two flutes for clean finish. For grooving, rebating and mortising. With TC centre tip. The TC centre tip is ideal for plunging and working in abrasive materials such as chipboard, MDF, plywood and hardwood.

Precio 49,00 €
Bevel cutter with guide pin 45° S6mm

Bevel cutter with guide pin...

For chamfering thin sheets, plywood, acrylic, etc. For...

For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.

Precio 58,50 € Precio base 65,00 €
  • -10%
  • -10%
Bevel cutter with guide pin 45° S8mm

Bevel cutter with guide pin...

For chamfering thin sheets, plywood, acrylic, etc. For...

For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.

Precio 58,50 € Precio base 65,00 €
  • -10%
  • -10%
Bevel cutter with center tip 20° S8mm Bevel cutter with center tip 20° S8mm

Bevel cutter with center...

Bevel cutter with real center cutting edge for direct...

Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.

Precio 68,40 € Precio base 76,00 €
  • -10%
  • -10%
Overflow edge cutter for curved fronts for solid surface

Overflow edge cutter for...

Overflow edge cutter for curved fronts for solid surface

Overflow edge cutter for curved fronts for solid surface

Precio 70,20 € Precio base 78,00 €
  • -10%
  • -10%
Bevel cutter 6° with beveled bearing for solid surface

Bevel cutter 6° with...

For edging sinks and vanity bowls. The special taper on the...

For edging sinks and vanity bowls. The special taper on the Bearing sleeve allows for perfect guide following around the inside of the bowl.

Precio 70,35 € Precio base 78,17 €
  • -10%
  • -10%
Volver arriba