Filtrar por
Disponibilidad
Diámetro de conexión
Diámetro (D)
Longitud del cortador - altura
Largo total
Radio/ángulo
Cortadores
Amplio programa de fresadoras profesionales para un resultado perfecto.
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Straight bit shank 8mm
Straight bit shank 8mm
For milling a shadow gap or water surge at the basin and water...
For milling a shadow gap or water surge at the basin and water drainage channels on the sink.
V-Groove cutter 108° S8mm for ALUCOBOND, DiBOND, REYNOBOND
V-Groove cutter 108° S8mm for ALUCOBOND, DiBOND, REYNOBOND
For chamfering thin sheets, plywood, acrylic, etc. For...
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Straight bit shank 8mm
Straight bit shank 8mm
Bevel cutter with real center cutting edge for direct...
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Bevel cutter with bearing
Bevel cutter with bearing
Trimming bevel cutter with bearing
Trimming bevel cutter with bearing
Straight bit shank 12 mm
Straight bit shank 12 mm
Ballbearings diameter 16 mm and 12,7 mm included.
Ballbearings diameter 16 mm and 12,7 mm included.
Straight bit shank 8mm
Straight bit shank 8mm
Bevel cutter with bearing for solid surface
Bevel cutter with bearing for solid surface
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Diamond PCD rounding over bit Shank 8 mm
Diamond PCD rounding over bit Shank 8 mm
T-Slot cutter with radius
T-Slot cutter with radius
Titman Staff / corner bead HW Z=2 D=28,7 L=23 R=6,3 S=8
Titman Staff / corner bead HW Z=2 D=28,7 L=23 R=6,3 S=8
Diamond PCD rounding over bit Shank 8 mm
Diamond PCD rounding over bit Shank 8 mm
Profile mould cutter
Profile mould cutter
Straight bit shank 12 mm
Straight bit shank 12 mm
The following items are required to create the appropriate...
The following items are required to create the appropriate groove:Groover G36552-6.35 and arbor LDTA/8
