Fresadoras / CNC

Adecuado para: Acero, Acero inoxidable, Hierro fundido,...

Adecuado para: Acero, Acero inoxidable, Hierro fundido, aluminio, cobre y plásticos

Adecuado para: Acero, Acero inoxidable, Hierro fundido,...

Adecuado para: Acero, Acero inoxidable, Hierro fundido, Aluminio y cobre

Adecuado para: Acero, Acero inoxidable, Hierro fundido,...

Adecuado para: Acero, Acero inoxidable, Hierro fundido, Aluminio y cobre

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Adecuado para: Acero, Acero inoxidable, Hierro fundido,...

Adecuado para: Acero, Acero inoxidable, Hierro fundido, CO-superalloys, NI-superalloys, TI-superalloys

Spiral cutter Z1 Negative - Down cut for Plastics Suitable...

Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 6 mm

Straight bit shank 6 mm

Solid carbide milling cutter with rounded chip chamber and...

Solid carbide milling cutter with rounded chip chamber and mirror grinding.Optimized cutting geometry for processing all non-ferrous metals.

V-Groove cutter

V-Groove cutter

V-Groove cutter

V-Groove cutter

Straight bit shank 8mm

Straight bit shank 8mm

Straight cutter with two flutes for clean finish. For...

Straight cutter with two flutes for clean finish. For grooving, rebating and mortising. With TC centre tip. The TC centre tip is ideal for plunging and working in abrasive materials such as chipboard, MDF, plywood and hardwood.

For chamfering thin sheets, plywood, acrylic, etc. For...

For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.

For chamfering thin sheets, plywood, acrylic, etc. For...

For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.

Guttering cutter

Guttering cutter

Guttering cutter

Guttering cutter

Guttering cutter

Guttering cutter

Bevel cutter with real center cutting edge for direct...

Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.

Titman face milling router bit Z=3 D=25 L=12 GL=44 S=8

Titman face milling router bit Z=3 D=25 L=12 GL=44 S=8

Overflow edge cutter for curved fronts for solid surface

Overflow edge cutter for curved fronts for solid surface

For edging sinks and vanity bowls. The special taper on the...

For edging sinks and vanity bowls. The special taper on the Bearing sleeve allows for perfect guide following around the inside of the bowl.

Rounding over cutter with guide pin shank 8 mm

Rounding over cutter with guide pin shank 8 mm

Straight bit shank 8mm

Straight bit shank 8mm

Inlay cutter for solid surface

Inlay cutter for solid surface

Premium Half round cutter

Premium Half round cutter

Premium Half round cutter

Premium Half round cutter

Bevel cutter for solid surface

Bevel cutter for solid surface