JVL pro-line roundnose bit...
JVL pro-line roundnose bit D 19 mm
JVL pro-line roundnose bit D 19 mm
Filtrar por
Disponibilidad
Diámetro de conexión
Diámetro (D)
Longitud del cortador - altura
Largo total
Radio/ángulo
Cortadores
Amplio programa de fresadoras profesionales para un resultado perfecto.
Hay 27 productos.
JVL pro-line roundnose bit D 19 mm
JVL pro-line roundnose bit D 19 mm
Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=8
Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=8
Dovetail bit HW D=13,5 A=13 degrees L=12,5 GL=44 S=8
Dovetail bit HW D=13,5 A=13 degrees L=12,5 GL=44 S=8
Specifically designed for cutting in hinges. stair treads and...
Specifically designed for cutting in hinges. stair treads and the general routing of larger flat bottom areas
Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=6mm
Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=6mm
Keyhole bit HW D=12,7 mm S=8
Keyhole bit HW D=12,7 mm S=8
Ballbearings diameter 16 mm and 12,7 mm included.
Ballbearings diameter 16 mm and 12,7 mm included.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8
Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8
Rounding over cutter R5 S8mm
Rounding over cutter R5 S8mm
Rounding over cutter R4 S8mm
Rounding over cutter R4 S8mm
Replacement tip bearing guide cutter. For coated boards, solid...
Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials
Ballbearings diameter 16 mm and 12,7 mm included.
Ballbearings diameter 16 mm and 12,7 mm included.
Replacement tip rebate cutter with bearing
Replacement tip rebate cutter with bearing