JVL pro-line rounding over...
JVL pro-line rounding over bit 31.8mm
JVL pro-line rounding over bit 31.8mm
Filtrar por
Disponibilidad
Diámetro de conexión
Diámetro (D)
Longitud del cortador - altura
Largo total
Radio/ángulo
Cortadores
Amplio programa de fresadoras profesionales para un resultado perfecto.
Hay 54 productos.
JVL pro-line rounding over bit 31.8mm
JVL pro-line rounding over bit 31.8mm
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
ENT Straight Cutter TC / One Flute with 8 mm shank
ENT Straight Cutter TC / One Flute with 8 mm shank
ENT Straight Cutter TC / One Flute with 8 mm shank
ENT Straight Cutter TC / One Flute with 8 mm shank
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank
ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank
ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank
ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank
ENT trimming cutter TC 9.5 x 25.4 x 68 mm with 8mm shank
ENT trimming cutter TC 9.5 x 25.4 x 68 mm with 8mm shank
Straight bit shank 6 mm
Straight bit shank 6 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Fresa con guía de rodamientos para recortar los bordes...
Fresa con guía de rodamientos para recortar los bordes salientes de chapa y plástico. También es posible copiar usando una plantilla. Los diámetros pequeños son ideales para procesar esquinas interiores.
Trimmers with bearing
Trimmers with bearing
For chamfering thin sheets, plywood, acrylic, etc. For...
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 12 mm
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.