Fresadoras / CNC

JVL Rounding over router bit R 7.9 mm with 8mm shank

JVL Rounding over router bit R 7.9 mm with 8mm shank

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8

EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8

Single flute cutter with neck for plastic and aluminium

Single flute cutter with neck for plastic and aluminium

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Double flute milling cutter for plastic and aluminium

Double flute milling cutter for plastic and aluminium

Double flute milling cutter for plastic and aluminium

Double flute milling cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

Spiral finishing cutter upcut Z1

Spiral finishing cutter upcut Z1

Rebate cutter without bearing D=17,5 mm S=8

Rebate cutter without bearing D=17,5 mm S=8

Spiral finishing cutter downcut Z1 

Spiral finishing cutter downcut Z1 

Spiral cutter Z1 Negative - Down cut for Plastics Suitable...

Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Straight bit shank 6 mm

Straight bit shank 6 mm

Spiral cutter Z2 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z2 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Double flute milling cutter for plastic and aluminium

Double flute milling cutter for plastic and aluminium

Double flute milling cutter for plastic and aluminium

Double flute milling cutter for plastic and aluminium

Straight cutter for Plastics Suitable for: Acrylonitrile...

Straight cutter for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic, Plexi etc.)

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium