Fresadoras / CNC

Adecuado para: aluminio, cobre, plásticos.

Adecuado para: aluminio, cobre, plásticos.

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

ENT Straight Cutter TC / One Flute with 8 mm shank

ENT Straight Cutter TC / One Flute with 8 mm shank

EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8

EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8

Single flute cutter with neck for plastic and aluminium

Single flute cutter with neck for plastic and aluminium

Adecuado para: Acero, Acero inoxidable, Hierro fundido,...

Adecuado para: Acero, Acero inoxidable, Hierro fundido, aluminio, cobre y plásticos

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

Double flute milling cutter for plastic and aluminium

Double flute milling cutter for plastic and aluminium

Straight bit shank 6 mm

Straight bit shank 6 mm

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 6 mm

Straight bit shank 6 mm

Straight bit shank 6 mm

Straight bit shank 6 mm

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 8mm

Straight bit shank 8mm

Solid carbide milling cutter with rounded chip chamber and...

Solid carbide milling cutter with rounded chip chamber and mirror grinding.Optimized cutting geometry for processing all non-ferrous metals.

Straight bit shank 12 mm

Straight bit shank 12 mm

Guttering cutter

Guttering cutter

Guttering cutter

Guttering cutter

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 8mm

Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10

Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10

Dovetail bit HW Z=2 D=20 A=10° L=16 GL=52 S=8

Dovetail bit HW Z=2 D=20 A=10° L=16 GL=52 S=8

Trimmers with bearing

Trimmers with bearing

Fresa con guía de rodamientos para recortar los bordes...

Fresa con guía de rodamientos para recortar los bordes salientes de chapa y plástico. También es posible copiar usando una plantilla. Los diámetros pequeños son ideales para procesar esquinas interiores.

Trimmers with bearing

Trimmers with bearing

Guttering cutter

Guttering cutter

Spiral cutter Z2 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z2 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)