AS2 3,0x57
Adecuado para: aluminio, cobre, plásticos.
Adecuado para: aluminio, cobre, plásticos.
Filtrar por
Disponibilidad
Diámetro del agujero
Diámetro de conexión
Diámetro (D)
Longitud del cortador - altura
Largo total
Radio/ángulo
Cortadores
Amplio programa de fresadoras profesionales para un resultado perfecto.
Hay 31 productos.
Adecuado para: aluminio, cobre, plásticos.
Adecuado para: aluminio, cobre, plásticos.
JVL pro-line rounding over bit 31.8mm
JVL pro-line rounding over bit 31.8mm
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
ENT Straight Cutter TC / One Flute with 8 mm shank
ENT Straight Cutter TC / One Flute with 8 mm shank
Adecuado para: Acero, Acero inoxidable, Hierro fundido,...
Adecuado para: Acero, Acero inoxidable, Hierro fundido, aluminio, cobre y plásticos
Straight bit shank 8mm
Straight bit shank 8mm
Spiral finishing cutter upcut Z2
Spiral finishing cutter upcut Z2
Solid carbide milling cutter with rounded chip chamber and...
Solid carbide milling cutter with rounded chip chamber and mirror grinding.Optimized cutting geometry for processing all non-ferrous metals.
Spiral finishing cutter downcut Z2
Spiral finishing cutter downcut Z2
Two flute solid carbide spiral bit 5 mm with 8 mm shank....
Two flute solid carbide spiral bit 5 mm with 8 mm shank. Positive (upcut) spiral.
Spiral cutter for ALUCOBOND, DiBOND, REYNOBOND
Spiral cutter for ALUCOBOND, DiBOND, REYNOBOND
Spiral cutter for ALUCOBOND, DiBOND, REYNOBOND
Spiral cutter for ALUCOBOND, DiBOND, REYNOBOND
Two flute ogee cutter with exchangeable ball bearing and 8mm...
Two flute ogee cutter with exchangeable ball bearing and 8mm shank
Profile cutter OG D9,5 S8mm
Profile cutter OG D9,5 S8mm
Rounding over cutter R10 S=10mm
Rounding over cutter R10 S=10mm
Rounding over cutter with guide pin shank 8 mm
Rounding over cutter with guide pin shank 8 mm
Rounding over cutter R10 S8mm
Rounding over cutter R10 S8mm
Spiral cutter with bevel for ALUCOBOND, DiBOND, REYNOBOND
Spiral cutter with bevel for ALUCOBOND, DiBOND, REYNOBOND
Spiral cutter with bevel for ALUCOBOND, DiBOND, REYNOBOND
Spiral cutter with bevel for ALUCOBOND, DiBOND, REYNOBOND
Spiral cutter with bevel for ALUCOBOND, DiBOND, REYNOBOND
Spiral cutter with bevel for ALUCOBOND, DiBOND, REYNOBOND
Two flutes. With exchangeable ball bearing. The set combines a...
Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts. For woodthickness from 19 to 21 mm
Two flutes. With exchangeable ball bearing. The set combines a...
Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts. For woodthickness from 19 to 21 mm
Spiral cutter with bevel for ALUCOBOND, DiBOND, REYNOBOND
Spiral cutter with bevel for ALUCOBOND, DiBOND, REYNOBOND
Spiral cutter with bevel for ALUCOBOND, DiBOND, REYNOBOND
Spiral cutter with bevel for ALUCOBOND, DiBOND, REYNOBOND
ENT 17440 Rail- & Stile Cutter Chamfer TC. Type A with 8...
ENT 17440 Rail- & Stile Cutter Chamfer TC. Type A with 8 mm shank. For woodthickness from 19 to 21 mm