JVL pro-line chamfer bit...
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
Filtrar por
Disponibilidad
Diámetro de conexión
Diámetro (D)
Longitud del cortador - altura
Largo total
Radio/ángulo
Cortadores
Amplio programa de fresadoras profesionales para un resultado perfecto.
Hay 33 productos.
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
JVL pro-line roundnose bit D 19 mm
JVL pro-line roundnose bit D 19 mm
Adecuado para: Acero, Acero inoxidable y cobre
Adecuado para: Acero, Acero inoxidable y cobre
Adecuado para: Acero, Acero inoxidable y cobre
Adecuado para: Acero, Acero inoxidable y cobre
JVL pro-line Raised panel chamfer bit 25°
JVL pro-line Raised panel chamfer bit 25°
Adecuado para: Acero, Acero inoxidable, Hierro fundido,...
Adecuado para: Acero, Acero inoxidable, Hierro fundido, Aluminio y cobre
JVL Rounding over router bit R 6.35 mm with 8mm shank
JVL Rounding over router bit R 6.35 mm with 8mm shank
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8
Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8
Dovetail bit HW D=13,5 A=13 degrees L=12,5 GL=44 S=8
Dovetail bit HW D=13,5 A=13 degrees L=12,5 GL=44 S=8
Face milling bit HW Z=2 D=20 L=13 GL=45 S=8
Face milling bit HW Z=2 D=20 L=13 GL=45 S=8
Profile guide cutter with bearing on shank
Profile guide cutter with bearing on shank
ENT 13821 Chamfer cutter 45 degrees with ball bearing and 8...
ENT 13821 Chamfer cutter 45 degrees with ball bearing and 8 mm shank
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8
Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8
Rounding over cutter with guide pin shank 8 mm
Rounding over cutter with guide pin shank 8 mm
Rounding over cutter with bearing for solid surface materials
Rounding over cutter with bearing for solid surface materials
Rounding over cutter with bearing for solid surface materials
Rounding over cutter with bearing for solid surface materials
Titman flute bit R=4 S=8
Titman flute bit R=4 S=8
Finger pull Cutters
Finger pull Cutters