Home

JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank

JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank

Bi-metal M3 Hole Saws with vario-pitched teeth for...

Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.

JVL Rounding over router bit R 4.8 mm with 8mm shank

JVL Rounding over router bit R 4.8 mm with 8mm shank

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

Bi-metal M3 Hole Saws with vario-pitched teeth for...

Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 6 mm

Straight bit shank 6 mm

Miniature bevel cutter with bearing 45 degrees

Miniature bevel cutter with bearing 45 degrees

Miniature bevel cutter with bearing 45 degrees

Miniature bevel cutter with bearing 45 degrees

Guttering cutter

Guttering cutter

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Straight bit shank 8mm

Straight bit shank 8mm

Rounding over cutter with guide pin shank 8 mm

Rounding over cutter with guide pin shank 8 mm

Rounding over cutter with bearing for solid surface materials

Rounding over cutter with bearing for solid surface materials

Titman Staff / corner bead bit with bearing HW Z=2 D=22 L=14...

Titman Staff / corner bead bit with bearing HW Z=2 D=22 L=14 R=3,2 S=8

Profile cutter PCC22

Profile cutter PCC22

Water channel cutter

Water channel cutter

End cutting saw blade 140x3.6x55+4 Z=36 CSEN750035...

End cutting saw blade 140x3.6x55+4 Z=36 CSEN750035 Application IN-801 end trimming unit Operations on supported and plastic edges.Sawing glued edges

Diamond PCD rounding over bit Shank 8 mm

Diamond PCD rounding over bit Shank 8 mm

Diamond PCD rounding over bit Shank 8 mm

Diamond PCD rounding over bit Shank 8 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

End cutting saw blade 140x3.6x30+3+3 Z=36 N3401N0503 MACHINES...

End cutting saw blade 140x3.6x30+3+3 Z=36 N3401N0503 MACHINES / APPLICATIONS AKRON 1400 - VERSIONS UP UNTIL DECEMBER 2016. Machining operations on supported and plastic edges. DESIGN HW tips. Alternate tooth. NOTES End cutting of glued edges. Max. rpm: 12,000

Profile cutter SBBC5

Profile cutter SBBC5

Profile cutter SBBC3

Profile cutter SBBC3

Profile cutter SBBC2

Profile cutter SBBC2