JVL pro-line chamfer bit...
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
Filtrar por
Disponibilidad
Diámetro de conexión
Diámetro (D)
Longitud del cortador - altura
Largo total
Radio/ángulo
Cortadores
Hay 48 productos.
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
JVL pro-line roundnose bit D 19 mm
JVL pro-line roundnose bit D 19 mm
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Adecuado para: Acero, Acero inoxidable y cobre
Adecuado para: Acero, Acero inoxidable y cobre
Adecuado para: Acero, Acero inoxidable y cobre
Adecuado para: Acero, Acero inoxidable y cobre
JVL pro-line Raised panel chamfer bit 25°
JVL pro-line Raised panel chamfer bit 25°
Adecuado para: Acero, Acero inoxidable, Hierro fundido,...
Adecuado para: Acero, Acero inoxidable, Hierro fundido, Aluminio y cobre
JVL Rounding over router bit R 6.35 mm with 8mm shank
JVL Rounding over router bit R 6.35 mm with 8mm shank
Adecuado para: Acero, Acero inoxidable, Hierro fundido,...
Adecuado para: Acero, Acero inoxidable, Hierro fundido, aluminio, cobre y plásticos
Spiral cutter Z2 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z2 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
For use on twist drills with a 10 mm shank and a diameter of 4...
For use on twist drills with a 10 mm shank and a diameter of 4 mm to 10 mm.The countersinkis guided to the shank via the drill spiral and fastened there.
For use on twist drills with a 10 mm shank and a diameter of 4...
For use on twist drills with a 10 mm shank and a diameter of 4 mm to 10 mm.The countersinkis guided to the shank via the drill spiral and fastened there.
Dovetail bit HW D=13,5 A=13 degrees L=12,5 GL=44 S=8
Dovetail bit HW D=13,5 A=13 degrees L=12,5 GL=44 S=8
Straight cutter for Plastics Suitable for: Acrylonitrile...
Straight cutter for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic, Plexi etc.)
Face milling bit HW Z=2 D=20 L=13 GL=45 S=8
Face milling bit HW Z=2 D=20 L=13 GL=45 S=8
Ball nose Spiral cutter Z=1 Positive - UpcutBall nose Spiral...
Ball nose Spiral cutter Z=1 Positive - UpcutBall nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Solid carbide milling cutter with rounded chip chamber and...
Solid carbide milling cutter with rounded chip chamber and mirror grinding.Optimized cutting geometry for processing all non-ferrous metals.