Home

Adecuado para: Acero, Acero inoxidable, Hierro fundido,...

Adecuado para: Acero, Acero inoxidable, Hierro fundido, aluminio, cobre y plásticos

Cornerround knife radius 2mm D.16 x 16,5 x 2 R=2 Biesse Akron...

Cornerround knife radius 2mm D.16 x 16,5 x 2 R=2 Biesse Akron 1 piece

Adecuado para: Acero, Acero inoxidable, Hierro fundido,...

Adecuado para: Acero, Acero inoxidable, Hierro fundido, aluminio, cobre y plásticos

Adecuado para: Acero, Acero inoxidable, Hierro fundido,...

Adecuado para: Acero, Acero inoxidable, Hierro fundido, Aluminio y cobre

EPROCUT Rounding over bit HW Z=2 D=16,7 R=2 L=8 GL=40 S=8

EPROCUT Rounding over bit HW Z=2 D=16,7 R=2 L=8 GL=40 S=8

Knife in HW 16.5x16x2 R=2 CCEN700007

Knife in HW 16.5x16x2 R=2 CCEN700007

Knife in HW R=2 N3402N0125

Knife in HW R=2 N3402N0125

Two flute rounding over cutter with an exchangeable bearing...

Two flute rounding over cutter with an exchangeable bearing with 12.7 mm. For precise and clean rounded edges.

Knife in HW R=2 CSEN700020

Knife in HW R=2 CSEN700020

Knife in HW R=2 CSEN700019

Knife in HW R=2 CSEN700019

Knife in HW R=1/2/25 degrees CSEN700026

Knife in HW R=1/2/25 degrees CSEN700026

Knife in HW R=1/2/25 degrees CSEN700025

Knife in HW R=1/2/25 degrees CSEN700025

Ball nose Spiral cutter Z=1 Positive - UpcutBall nose Spiral...

Ball nose Spiral cutter Z=1 Positive - UpcutBall nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

For milling a shadow gap or water surge at the basin and water...

For milling a shadow gap or water surge at the basin and water drainage channels on the sink.

Edge scraper with anti-bleaching profile R=2 3402A0126

Edge scraper with anti-bleaching profile R=2 3402A0126

Ballbearings diameter 16 mm and 12,7 mm included.

Ballbearings diameter 16 mm and 12,7 mm included.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Titman Staff / corner bead bit with bearing HW Z=2 D=20 L=12...

Titman Staff / corner bead bit with bearing HW Z=2 D=20 L=12 R=2 S=8

Titman rounding over cutter R=2 S=8

Titman rounding over cutter R=2 S=8

Knuckle bone cutter for solid surface

Knuckle bone cutter for solid surface

T-Slot cutter with radius

T-Slot cutter with radius

T-Slot cutter with radius

T-Slot cutter with radius

Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CCW...

Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CCW N3401N0396

Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CW...

Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CW N3401N0395

Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CCW...

Tilted fine trimmer 75x25x16+2KN R=1/2/3/25 degrees CCW N3401N0394