Home

Adecuado para: Acero, Acero inoxidable, Hierro fundido,...

Adecuado para: Acero, Acero inoxidable, Hierro fundido, aluminio, cobre y plásticos

Adecuado para: Acero, Acero inoxidable, Hierro fundido,...

Adecuado para: Acero, Acero inoxidable, Hierro fundido, aluminio, cobre y plásticos

Guttering cutter

Guttering cutter

Radius engraving cutter These double-edged cutters create a...

Radius engraving cutter These double-edged cutters create a flat of approx. 1 mm at the bottom.

Radius engraving cutter These double-edged cutters create a...

Radius engraving cutter These double-edged cutters create a flat of approx. 1 mm at the bottom.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Guttering cutter for solid surface

Guttering cutter for solid surface

Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8

Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8

Ball nose Spiral cutter Z=1 Positive - UpcutBall nose Spiral...

Ball nose Spiral cutter Z=1 Positive - UpcutBall nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Rounding over cutter R4  S8mm

Rounding over cutter R4  S8mm

Rounding over cutter R4 S=6mm

Rounding over cutter R4 S=6mm

Profile cutter OG

Profile cutter OG

Ball nose Spiral cutter Z=1 Positive - UpcutBall nose Spiral...

Ball nose Spiral cutter Z=1 Positive - UpcutBall nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Titman flute bit R=4 S=8

Titman flute bit R=4 S=8

Profile cutter PC21

Profile cutter PC21

Profile cutter CLT4

Profile cutter CLT4

Half round profile cutter

Half round profile cutter

Profile cutter KB4

Profile cutter KB4

This set was designed to produce a variety of concave and...

This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.

Stark YS107BZM Multiradius roundover cutter Light alloy body,...

Stark YS107BZM Multiradius roundover cutter Light alloy body, reduced recoil suitable for manual feed.Comes with: - set knives R5/R10- set knives R4/R8- set knives R3/R6- allen key- case

This set was designed to produce a variety of concave and...

This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.

This set was designed to produce a variety of concave and...

This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.

This set was designed to produce a variety of concave and...

This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.

This set was designed to produce a variety of concave and...

This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.

Steel body with standard tungsten carbide profiled knives for...

Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure, different radius can be fitted onto the same tool body,  R=3, 4, 5, 6, 8 and 10mm included

Steel body with standard tungsten carbide profiled knives for...

Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure, different radius can be fitted onto the same tool body,  R=3, 4, 5, 6, 8 and 10mm included