adjustable Grooving set TYPE A + B - 160 x 8-28 mm Z=4+2 V=4

adjustable Grooving set TYPE A + B - 160 x 8-28 mm Z=4+2 V=4

adjustable cutterhead for tenons 200 x 8-15 mm Z=4 V=4

adjustable cutterhead for tenons 200 x 8-15 mm Z=4 V=4

Stark adjustable cutterhead for tenons 250x8-15 TH06TM10

Stark adjustable cutterhead for tenons 250x8-15 TH06TM10

Cutterhead with steel body, tungsten carbide standard...

Cutterhead with steel body, tungsten carbide standard reversible knives and spurs, adjustable with 1/10 mm spacing rings (included) for high precision groove cutting,

Stark Adjustable grooving 160 x 4-7,5 Z=4 V=4

Stark Adjustable grooving 160 x 4-7,5 Z=4 V=4

Cutterhead with HW reversible knives and spurs for making thin...

Cutterhead with HW reversible knives and spurs for making thin precision grooves , adjustable by means of spacing rings.  Spacing rings are included.

Cutterhead with HW reversible knives and spurs for making thin...

Cutterhead with HW reversible knives and spurs for making thin precision grooves , adjustable by means of spacing rings. Spacing rings are included.

Adjustable grooving cutter TYPE A + B - 140 x 4-15 mm Z=4+2 V=4

Adjustable grooving cutter TYPE A + B - 140 x 4-15 mm Z=4+2 V=4

Cutterhead with HW reversible knives and spurs for making...

Cutterhead with HW reversible knives and spurs for making precision grooves.

adjustable grooving TYPE A + B - 160 x 16-44mm

adjustable grooving TYPE A + B - 160 x 16-44mm

Stark Adjustable grooving TYPE A - 140X4-7,5 Z=4 V=4

Stark Adjustable grooving TYPE A - 140X4-7,5 Z=4 V=4

Stark adjustable grooving TYPE A - 160 x 16-30 mm

Stark adjustable grooving TYPE A - 160 x 16-30 mm

adjustable grooving TYPE A - 160x 12,4 -24 mm

adjustable grooving TYPE A - 160x 12,4 -24 mm

Steel body, standard tungsten carbide profiled knives for high...

Steel body, standard tungsten carbide profiled knives for high precision jointing in hardwood andsoftwood, suitable for end grain and corner joints (windows), for wood thicknesses 38-94 mm, suitablefor both manual and mechanical feed.

Steel body. standard tungsten carbide profiled knives for high...

Steel body. standard tungsten carbide profiled knives for high precision jointing in hardwood andsoftwood. suitable for end grain and corner joints (windows). for wood thicknesses 38-94 mm. suitablefor both manual and mechanical feed.

Stark along grain joint cutter 125X50 Z=2 YH152AAM

Stark along grain joint cutter 125X50 Z=2 YH152AAM

Stark Brazed Adjustable grooving 140 x 1,8 - 3,4 Z=4 V=4

Stark Brazed Adjustable grooving 140 x 1,8 - 3,4 Z=4 V=4

HW brazed cutter with spurs for making precision grooves with...

HW brazed cutter with spurs for making precision grooves with various thickness.The tool is complete with spacing rings.

This set was designed to produce a variety of concave and...

This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.

Stark cross grain joint cutter 125X60 Z=3 YH156AAM

Stark cross grain joint cutter 125X60 Z=3 YH156AAM

Stark CUTTERHEAD FOR 45 degrees BEVELS 150mm

Stark CUTTERHEAD FOR 45 degrees BEVELS 150mm

Cutterhead for door frames with HW knives

Cutterhead for door frames with HW knives

Cutterheads for windows hardware fittings Type 1

Cutterheads for windows hardware fittings Type 1

Stark cutterhead variable angle 160mm

Stark cutterhead variable angle 160mm

Cutterhead with adjustable angle knives for chamfering 140 mm...

Cutterhead with adjustable angle knives for chamfering 140 mm aluminum

Steel body. standard tungsten carbide profiled knives for...

Steel body. standard tungsten carbide profiled knives for milling hardwood and softwood. chip thicknesslimitation and reduced recoil. suitable for both manual and mechanical feed.

Cutterhead with HW reversible knives and spurs for making thin...

Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm.  can be combined with Type A milling head with the same diameter and bore.

grooving cutter TYPE B - 140X7,65 Z=2

grooving cutter TYPE B - 140X7,65 Z=2

Cutterhead with steel body, tungsten carbide standard...

Cutterhead with steel body, tungsten carbide standard reversible knives for high precision groove cutting, suitable for manual and mechanical feed.Central element Cutter TH09TM02 (type B) is a optional cutter for cutterhead TH09TM01 (type A)