Bevel cutter S=8 with high diameter

Bevel cutter S=8 with high diameter

Bevel cutter with bearing for solid surface

Bevel cutter with bearing for solid surface

Bevel cutter heavy duty

Bevel cutter heavy duty

Bevel cutter heavy duty

Bevel cutter heavy duty

Bevel cutter with high cutting length

Bevel cutter with high cutting length

Bevel cutter S=8 with high diameter

Bevel cutter S=8 with high diameter

Bevel cutter S=12 with high diameter

Bevel cutter S=12 with high diameter

Bevel cutter S=12 with high diameter

Bevel cutter S=12 with high diameter

For folding, profiling and formatting in one operation.

For folding, profiling and formatting in one operation.

Bevel cutter with bearing

Bevel cutter with bearing

Bevel cutter with bearing

Bevel cutter with bearing

Bevel cutter with real center cutting edge for direct...

Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.

For chamfering thin sheets, plywood, acrylic, etc. For...

For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.

For chamfering thin sheets, plywood, acrylic, etc. For...

For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.

Bevel cutter for folding and chamfering wood, laminate and...

Bevel cutter for folding and chamfering wood, laminate and plastic sheets.

For use on twist drills with a 10 mm shank and a diameter of 4...

For use on twist drills with a 10 mm shank and a diameter of 4 mm to 10 mm.The countersinkis guided to the shank via the drill spiral and fastened there.

For use on twist drills with a 10 mm shank and a diameter of 4...

For use on twist drills with a 10 mm shank and a diameter of 4 mm to 10 mm.The countersinkis guided to the shank via the drill spiral and fastened there.

Double chamfering bit HW Z=2+2 A=45 degrees L=15 S=8

Double chamfering bit HW Z=2+2 A=45 degrees L=15 S=8

Double chamfering bit HW Z=2+2 A=45 degrees L=15 S=6

Double chamfering bit HW Z=2+2 A=45 degrees L=15 S=6

Adjustable Double chamfering bit with bearing 16 to 32 mm....

Adjustable Double chamfering bit with bearing 16 to 32 mm. Titman BCS38-12

Double rounding over / chamfer bit adjustable HW Z=2+2 D=22...

Double rounding over / chamfer bit adjustable HW Z=2+2 D=22 R=2,5 A=45 degrees Shank 12 mm

Double rounding over / chamfer bit adjustable HW Z=2+2 D=22...

Double rounding over / chamfer bit adjustable HW Z=2+2 D=22 R=2,5 A=45 degrees shank 8 mm

LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN CSEN350086

LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN CSEN350086

Miniature bevel cutter with bearing 45 degrees

Miniature bevel cutter with bearing 45 degrees

Miniature bevel cutter with bearing 45 degrees

Miniature bevel cutter with bearing 45 degrees

Miniature bevel cutter with bearing 45 degrees

Miniature bevel cutter with bearing 45 degrees

Replacement tip bevel cutter shank 25 mm

Replacement tip bevel cutter shank 25 mm

Replacement tip bevel cutter shank 25 mm

Replacement tip bevel cutter shank 25 mm

Replacement tip bevel cutter with high diameter

Replacement tip bevel cutter with high diameter