EPROCUT Flush trim bit HW...
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
- -10%
- -10%
Filtrer par
Disponibilité
Diamètre de connexion
Diamètre (D)
Longueur de coupe - hauteur
Longueur totale
Rayon/angle
Coupeurs
Programme complet Toupies professionnelles pour un résultat parfait.
Il y a 85 produits.
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
ENT two flute dovetail cutter without spurs. with 8 mm shank.
ENT two flute dovetail cutter without spurs. with 8 mm shank.
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank
ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank
ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank
ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
ENT 17731 T-slot cutter TC 12.7 mm with 8 mm shank
ENT 17731 T-slot cutter TC 12.7 mm with 8 mm shank
Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre
Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 6 mm
Straight bit shank 6 mm
Single flute cutter Z=1 for solid surface
Single flute cutter Z=1 for solid surface
Single flute cutter Z=2 Negative for solid surface
Single flute cutter Z=2 Negative for solid surface
Profile guide cutter with bearing on shank
Profile guide cutter with bearing on shank
This results in a particularly clean result with thin coatings...
This results in a particularly clean result with thin coatings and long-fiber funnels.
This results in a particularly clean result with thin coatings...
This results in a particularly clean result with thin coatings and long-fiber funnels.
Keyhole bit HW D=12,7 mm S=8
Keyhole bit HW D=12,7 mm S=8
This results in a particularly clean result with thin coatings...
This results in a particularly clean result with thin coatings and long-fiber funnels.
This results in a particularly clean result with thin coatings...
This results in a particularly clean result with thin coatings and long-fiber funnels.
This results in a particularly clean result with thin coatings...
This results in a particularly clean result with thin coatings and long-fiber funnels.
Trimmers with bearing
Trimmers with bearing
Coupe-guide de roulement pour couper les placages saillants et...
Coupe-guide de roulement pour couper les placages saillants et les bords en plastique. Il est également possible de copier à l'aide d'un modèle. Les petits diamètres sont idéaux pour le traitement des coins intérieurs.
Trimmers with bearing
Trimmers with bearing
Single flute cutter Z=2 Negative for solid surface
Single flute cutter Z=2 Negative for solid surface
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimming cutter with bearing on shank for scanning overhead...
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.