Filtrer par

Disponibilité

Diamètre de connexion

Diamètre (D)

Longueur de coupe - hauteur

Longueur totale

Rayon/angle

Coupeurs

Fraises pour défonceuses

Programme complet Toupies professionnelles pour un résultat parfait.

Filtres actifs

  • Diamètre (D) : 2,5mm
  • Diamètre (D) : 38mm
BT4 2,5x40 BT4 2,5x40

BT4 2,5x40

Convient pour : acier, acier inoxydable, fonte, aluminium,...

Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.

Prix 11,00 €
BT2 2,5x40 BT2 2,5x40

BT2 2,5x40

Convient pour : acier, acier inoxydable, fonte, aluminium,...

Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.

Prix 11,00 €
ST2 2,5 x 40 ST2 2,5 x 40

ST2 2,5 x 40

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Prix 11,00 €
ST4 2,5 x 40 ST4 2,5 x 40

ST4 2,5 x 40

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Prix 12,00 €
Chamfer bit 38.1 mm 45°

Chamfer bit 38.1 mm 45°

JVL Chamfer bit 38.1 mm  45° with 8mm shank

JVL Chamfer bit 38.1 mm  45° with 8mm shank

Prix 12,00 €
ST3 2,5 x 40 ST3 2,5 x 40

ST3 2,5 x 40

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Prix 15,00 €
Spiral cutter Negative for Plastics D2,5 L10 S3mm

Spiral cutter Negative for...

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Prix 15,30 € Prix de base 17,00 €
  • -10%
  • -10%
Spiral cutter Positiv for Plastics D2,5 L10 S3mm

Spiral cutter Positiv for...

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Prix 15,30 € Prix de base 17,00 €
  • -10%
  • -10%
Staff Bead Cutter convex r 3.18 mm ENT 17010

Staff Bead Cutter convex r...

ENT 17010 Staff Bead Cutter convex r 3.18 mm with 12 mm shank

ENT 17010 Staff Bead Cutter convex r 3.18 mm with 12 mm shank

Prix 39,00 €
Ogee Cutter TC with Ball Bearing ENT 14892

Ogee Cutter TC with Ball...

Two flute ogee cutter with exchangeable ball bearing and 8mm...

Two flute ogee cutter with exchangeable ball bearing and 8mm shank

Prix 51,00 €
TCT rounding over set with bearing 16 to 32 mm. S12mm TCT rounding over set with bearing 16 to 32 mm. S12mm

TCT rounding over set with...

rounding over both sides at once.Suitable for material...

rounding over both sides at once.Suitable for material thickness 16 tot 32 mm.Supplied with a range of shims.

Prix 97,20 € Prix de base 108,00 €
  • -10%
  • -10%
Double chamfering bit with bearing 16 to 32 mm. S12mm Double chamfering bit with bearing 16 to 32 mm. S12mm

Double chamfering bit with...

Adjustable Double chamfering bit with bearing 16 to 32 mm....

Adjustable Double chamfering bit with bearing 16 to 32 mm. Titman BCS38-12

Prix 98,10 € Prix de base 109,00 €
  • -10%
  • -10%
Titman Staff / corner bead bit with bearing HW Z2 D38 L28 R9.5 S8 Titman Staff / corner bead bit with bearing HW Z2 D38 L28 R9.5 S8

Titman Staff / corner bead...

Titman Staff / corner bead bit with bearing HW Z=2 D=38 L=28...

Titman Staff / corner bead bit with bearing HW Z=2 D=38 L=28 R=9,5 S=8

Prix 99,27 € Prix de base 110,30 €
  • -10%
  • -10%
V-Groove cutter 45° L1(19) S12mm V-Groove cutter 45° L1(19) S12mm

V-Groove cutter 45° L1(19)...

V-Groove cutter, These cutters create a straight line of...

V-Groove cutter, These cutters create a straight line of approx. 1 mm at the bottom.

Prix 108,00 € Prix de base 120,00 €
  • -10%
  • -10%
Retour en haut