Filtrer par

Disponibilité

Diamètre de connexion

Diamètre (D)

Longueur de coupe - hauteur

Longueur totale

Rayon/angle

Coupeurs

Fraises pour défonceuses

Programme complet Toupies professionnelles pour un résultat parfait.

Filtres actifs

  • Diamètre (D) : 1,5mm
  • Diamètre (D) : 24mm
BT4 1,5x40 BT4 1,5x40

BT4 1,5x40

Convient pour : acier, acier inoxydable, fonte, aluminium,...

Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.

Prix 10,00 €
BTL2 1,5x50 BTL2 1,5x50

BTL2 1,5x50

Convient pour : acier, acier inoxydable, fonte, aluminium,...

Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.

Prix 10,00 €
BT2 1,5x40 BT2 1,5x40

BT2 1,5x40

Convient pour : acier, acier inoxydable, fonte, aluminium,...

Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.

Prix 10,00 €
ST4 1,5 x 40 ST4 1,5 x 40

ST4 1,5 x 40

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Prix 11,00 €
ST3 1,5 x 40 ST3 1,5 x 40

ST3 1,5 x 40

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Prix 11,00 €
VHMS 1,5x6x64mm VHMS 1,5x6x64mm

VHMS 1,5x6x64mm

Convient à: Acier, Acier inoxydable, Fonte, CO-superalloys,...

Convient à: Acier, Acier inoxydable, Fonte, CO-superalloys, NI-superalloys, TI-superalloys

Prix 20,00 €
VHMS 1,5x6x64mm VHMS 1,5x6x64mm

VHMS 1,5x6x64mm

Convient à: Acier, Acier inoxydable, Fonte, CO-superalloys,...

Convient à: Acier, Acier inoxydable, Fonte, CO-superalloys, NI-superalloys, TI-superalloys

Prix 20,00 €
Straight Cutter TC Z2 D24 S8mm

Straight Cutter TC Z2 D24...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

Prix 29,00 €
Spiral cutter Z1 Negative - Down cut D1,5 L5 S3 mm

Spiral cutter Z1 Negative -...

Spiral cutter Z1 Negative - Down cut for Plastics Suitable...

Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Prix 30,60 € Prix de base 34,00 €
  • -10%
  • -10%
Spiral cutter Z1 Positive - Upcut D1.5 L5 S3mm

Spiral cutter Z1 Positive -...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Prix 30,60 € Prix de base 34,00 €
  • -10%
  • -10%
Sinking cutter for solid surface

Sinking cutter for solid...

For milling a shadow gap or water surge at the basin and water...

For milling a shadow gap or water surge at the basin and water drainage channels on the sink.

Prix 51,30 € Prix de base 57,00 €
  • -10%
  • -10%
V-Groove cutter 108° S8mm for ALUCOBOND, DiBOND, REYNOBOND V-Groove cutter 108° S8mm for ALUCOBOND, DiBOND, REYNOBOND

V-Groove cutter 108° S8mm...

V-Groove cutter  108°  S8mm for ALUCOBOND, DiBOND, REYNOBOND

V-Groove cutter  108°  S8mm for ALUCOBOND, DiBOND, REYNOBOND

Prix 52,20 € Prix de base 58,00 €
  • -10%
  • -10%
Rounding over cutter with extended cutting edge R3 L11 S6mm Rounding over cutter with extended cutting edge R3 L11 S6mm

Rounding over cutter with...

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Prix 64,19 € Prix de base 71,32 €
  • -10%
  • -10%
Rounding over cutter with extended cutting edge R3 L11 S8mm Rounding over cutter with extended cutting edge R3 L11 S8mm

Rounding over cutter with...

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Prix 64,80 € Prix de base 72,00 €
  • -10%
  • -10%
Retour en haut