Plunge and trim cutter D6,3...
For milling thin-walled panels in caravan construction
For milling thin-walled panels in caravan construction
- -10%
- -10%
Filtrer par
Disponibilité
Diamètre de connexion
Diamètre (D)
Longueur de coupe - hauteur
Longueur totale
Rayon/angle
Coupeurs
Programme complet Toupies professionnelles pour un résultat parfait.
Il y a 24 produits.
For milling thin-walled panels in caravan construction
For milling thin-walled panels in caravan construction
Coupe-guide de roulement pour couper les placages saillants et...
Coupe-guide de roulement pour couper les placages saillants et les bords en plastique. Il est également possible de copier à l'aide d'un modèle. Les petits diamètres sont idéaux pour le traitement des coins intérieurs.
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Bearing guide trimmer Z2 for solid surface Suitable for...
Bearing guide trimmer Z2 for solid surface Suitable for Corian Hi-Macs Staron Avonite Hanex Varicor domovari
For chamfering thin sheets, plywood, acrylic, etc. For...
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
Bevel cutter with real center cutting edge for direct...
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Bevel cutter with bearing
Bevel cutter with bearing
Straight bit shank 8mm
Straight bit shank 8mm
Bevel cutter with bearing for solid surface
Bevel cutter with bearing for solid surface
Straight bit shank 12 mm
Straight bit shank 12 mm
Diamond PCD rounding over bit Shank 8 mm
Diamond PCD rounding over bit Shank 8 mm
T-Slot cutter with radius
T-Slot cutter with radius
Titman Staff / corner bead HW Z=2 D=28,7 L=23 R=6,3 S=8
Titman Staff / corner bead HW Z=2 D=28,7 L=23 R=6,3 S=8
Diamond PCD rounding over bit Shank 8 mm
Diamond PCD rounding over bit Shank 8 mm
Profile mould cutter
Profile mould cutter
The following items are required to create the appropriate...
The following items are required to create the appropriate groove:Groover G36552-6.35 and arbor LDTA/8