Fraises pour défonceuses

Convient pour : acier, acier inoxydable, fonte, aluminium,...

Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Convient à: Acier, Acier inoxydable, Fonte, CO-superalloys,...

Convient à: Acier, Acier inoxydable, Fonte, CO-superalloys, NI-superalloys, TI-superalloys

Spiral cutter Z1 Negative - Down cut for Plastics Suitable...

Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 6 mm

Straight bit shank 6 mm

Solid carbide milling cutter with rounded chip chamber and...

Solid carbide milling cutter with rounded chip chamber and mirror grinding.Optimized cutting geometry for processing all non-ferrous metals.

ENT 17739 T-groove cutter, Hardmetal, Shank gauge (S) 12 mm,...

ENT 17739 T-groove cutter, Hardmetal, Shank gauge (S) 12 mm, Cutter (D1) 35 mm, (D2) 12.7 mm, (NL1) 18 mm, (NL2) 9.5 mm, SL 40 mm, double-edged

ENT 16690 Rebate Cutter TC with Set of Ball Bearings 34.9 mm...

ENT 16690 Rebate Cutter TC with Set of Ball Bearings 34.9 mm with 8 mm shank

Rounding over cutter R12 S=12mm

Rounding over cutter R12 S=12mm

Rounding over cutter with guide pin shank 8 mm

Rounding over cutter with guide pin shank 8 mm

Titman face milling router bit for wood D=35 L=18 Shank 8 mm

Titman face milling router bit for wood D=35 L=18 Shank 8 mm

Bevel cutter with bearing and high cutting length

Bevel cutter with bearing and high cutting length

Straight bit shank 12 mm

Straight bit shank 12 mm

Bevel cutter with bearing and high cutting length

Bevel cutter with bearing and high cutting length

Bevel cutter with beveled bearing for solid surface

Bevel cutter with beveled bearing for solid surface

Hob cutter for solid surface

Hob cutter for solid surface

To make the complete profile. you must also order rounding...

To make the complete profile. you must also order rounding cutter ROCB127-12 (Radius 12.7 mm).