Fraises pour défonceuses

Convient pour : acier, acier inoxydable, fonte, aluminium,...

Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

JVL Chamfer bit 38.1 mm  45° with 8mm shank

JVL Chamfer bit 38.1 mm  45° with 8mm shank

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Convient à: Acier, Acier inoxydable, Fonte, CO-superalloys,...

Convient à: Acier, Acier inoxydable, Fonte, CO-superalloys, NI-superalloys, TI-superalloys

Spiral cutter Z1 Negative - Down cut for Plastics Suitable...

Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 6 mm

Straight bit shank 6 mm

Solid carbide milling cutter with rounded chip chamber and...

Solid carbide milling cutter with rounded chip chamber and mirror grinding.Optimized cutting geometry for processing all non-ferrous metals.

ENT 17010 Staff Bead Cutter convex r 3.18 mm with 12 mm shank

ENT 17010 Staff Bead Cutter convex r 3.18 mm with 12 mm shank

Two flute ogee cutter with exchangeable ball bearing and 8mm...

Two flute ogee cutter with exchangeable ball bearing and 8mm shank

Bevel cutter heavy duty

Bevel cutter heavy duty

Rebate cutter with bearing

Rebate cutter with bearing

Bevel cutter with high cutting length

Bevel cutter with high cutting length

rounding over both sides at once.Suitable for material...

rounding over both sides at once.Suitable for material thickness 16 tot 32 mm.Supplied with a range of shims.

Adjustable Double chamfering bit with bearing 16 to 32 mm....

Adjustable Double chamfering bit with bearing 16 to 32 mm. Titman BCS38-12

Titman Staff / corner bead bit with bearing HW Z=2 D=38 L=28...

Titman Staff / corner bead bit with bearing HW Z=2 D=38 L=28 R=9,5 S=8

V-Groove cutter, These cutters create a straight line of...

V-Groove cutter, These cutters create a straight line of approx. 1 mm at the bottom.

Profile cutter CDC48

Profile cutter CDC48

Profile cutter RBB

Profile cutter RBB

Shallow finger pull cutter

Shallow finger pull cutter