BT4 2,0x40
Convient pour : acier, acier inoxydable, fonte, aluminium,...
Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.
Filtrer par
Disponibilité
Diamètre de connexion
Diamètre (D)
Longueur de coupe - hauteur
Longueur totale
Rayon/angle
Coupeurs
Programme complet Toupies professionnelles pour un résultat parfait.
Il y a 25 produits.
Convient pour : acier, acier inoxydable, fonte, aluminium,...
Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.
Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre
Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre
Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre
Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
Convient à: Acier, Acier inoxydable, Fonte, CO-superalloys,...
Convient à: Acier, Acier inoxydable, Fonte, CO-superalloys, NI-superalloys, TI-superalloys
Spiral cutter Z1 Negative - Down cut for Plastics Suitable...
Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 6 mm
Straight bit shank 6 mm
Solid carbide milling cutter with rounded chip chamber and...
Solid carbide milling cutter with rounded chip chamber and mirror grinding.Optimized cutting geometry for processing all non-ferrous metals.
For edging sinks and vanity bowls. The special taper on the...
For edging sinks and vanity bowls. The special taper on the Bearing sleeve allows for perfect guide following around the inside of the bowl.
Rebate cutter with bearing
Rebate cutter with bearing
Cove mould cutter for solid surface
Cove mould cutter for solid surface
Cove mould cutter with bearing
Cove mould cutter with bearing
Titman flute bit HW Z=2 D=32 R=12 L=20 GL=60 S=12
Titman flute bit HW Z=2 D=32 R=12 L=20 GL=60 S=12
Profile mould cutter
Profile mould cutter
Profile mould cutter
Profile mould cutter