Fraises pour défonceuses

Convient pour : acier, acier inoxydable, fonte, aluminium,...

Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Convient à: Acier, Acier inoxydable, Fonte, CO-superalloys,...

Convient à: Acier, Acier inoxydable, Fonte, CO-superalloys, NI-superalloys, TI-superalloys

Groovers Z=2 d=6.35

Groovers Z=2 d=6.35

Groovers Z=2 d=6.35

Groovers Z=2 d=6.35

Groovers Z=2 d=6.35

Groovers Z=2 d=6.35

Groovers Z=2 d=6.35

Groovers Z=2 d=6.35

Spiral cutter Z1 Negative - Down cut for Plastics Suitable...

Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Groovers Z=2 d=6.35

Groovers Z=2 d=6.35

Groovers Z=2 d=6.35

Groovers Z=2 d=6.35

Groovers Z=2 d=6.35

Groovers Z=2 d=6.35

Groovers Z=2 d=6.35

Groovers Z=2 d=6.35

Groovers Z=2 d=6.35

Groovers Z=2 d=6.35

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 6 mm

Straight bit shank 6 mm

Solid carbide milling cutter with rounded chip chamber and...

Solid carbide milling cutter with rounded chip chamber and mirror grinding.Optimized cutting geometry for processing all non-ferrous metals.

Groovers Z=2 d=6.35

Groovers Z=2 d=6.35

V-Groove cutter  135°  S8mm for ALUCOBOND, DiBOND, REYNOBOND

V-Groove cutter  135°  S8mm for ALUCOBOND, DiBOND, REYNOBOND

Bevel cutter S=8 with high diameter

Bevel cutter S=8 with high diameter

Cutter combination for milling grooves for flashover seals....

Cutter combination for milling grooves for flashover seals. Suitable for seals from:   Schlegel QL-3434, QL-3070Deventer SV33, SP33, DS6677Trelleborg/Dipro L2020, L5019, L5020, L8003Goll AFK2615

Cutter combination for milling grooves for flashover seals....

Cutter combination for milling grooves for flashover seals. Suitable for seals from:   Schlegel QL-3434, QL-3070Deventer SV33, SP33, DS6677Trelleborg/Dipro L2020, L5019, L5020, L8003Goll AFK2615

Replacement tip rebate cutter with bearing 

Replacement tip rebate cutter with bearing 

For folding, profiling and formatting in one operation.

For folding, profiling and formatting in one operation.

For folding, profiling and formatting in one operation.

For folding, profiling and formatting in one operation.

Cutter combination for milling grooves for flashover seals....

Cutter combination for milling grooves for flashover seals. Suitable for seals from:   Schlegel QL-3434, QL-3070Deventer SV33, SP33, DS6677Trelleborg/Dipro L2020, L5019, L5020, L8003Goll AFK2615