Bevel cutter with guide pin...
For chamfering thin sheets, plywood, acrylic, etc. For...
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
- -10%
- -10%
Filtrer par
Disponibilité
Diamètre du trou
Épaisseur
Diamètre de connexion
Diamètre (D)
Longueur de coupe - hauteur
Longueur totale
Rayon/angle
Coupeurs
Programme complet Toupies professionnelles pour un résultat parfait.
Il y a 28 produits.
For chamfering thin sheets, plywood, acrylic, etc. For...
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
Bevel cutter with real center cutting edge for direct...
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Bevel cutter with bearing
Bevel cutter with bearing
Straight bit shank 8mm
Straight bit shank 8mm
Bevel cutter with bearing for solid surface
Bevel cutter with bearing for solid surface
Straight bit shank 12 mm
Straight bit shank 12 mm
Diamond PCD rounding over bit Shank 8 mm
Diamond PCD rounding over bit Shank 8 mm
Groover with bore 12 mm
Groover with bore 12 mm
Bevel cutter heavy duty
Bevel cutter heavy duty
Groover with bore 12 mm
Groover with bore 12 mm
T-Slot cutter with radius
T-Slot cutter with radius
Titman Staff / corner bead HW Z=2 D=28,7 L=23 R=6,3 S=8
Titman Staff / corner bead HW Z=2 D=28,7 L=23 R=6,3 S=8
Groover with bore 12 mm
Groover with bore 12 mm
Diamond PCD rounding over bit Shank 8 mm
Diamond PCD rounding over bit Shank 8 mm
Groover with bore 12 mm
Groover with bore 12 mm
Profile mould cutter
Profile mould cutter
The following items are required to create the appropriate...
The following items are required to create the appropriate groove:Groover G36552-6.35 and arbor LDTA/8
Groover with bore 12 mm
Groover with bore 12 mm
Bevel cutter with beveled bearing for solid surface
Bevel cutter with beveled bearing for solid surface
Bevel cutter with beveled bearing for solid surface
Bevel cutter with beveled bearing for solid surface
Rounding over cutter with runout top and bottom
Rounding over cutter with runout top and bottom