Fraises pour défonceuses

JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank

JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank

JVL pro-line roundnose bit D 19 mm

JVL pro-line roundnose bit D 19 mm

Convient pour : acier, acier inoxydable, fonte, aluminium,...

Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.

Convient pour : acier, acier inoxydable, fonte, aluminium,...

Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.

Convient à: Acier, Acier inoxydable et cuivre

Convient à: Acier, Acier inoxydable et cuivre

Convient à: Acier, Acier inoxydable et cuivre

Convient à: Acier, Acier inoxydable et cuivre

JVL pro-line Raised panel chamfer bit 25°

JVL pro-line Raised panel chamfer bit 25°

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

JVL Rounding over router bit R 6.35 mm with 8mm shank

JVL Rounding over router bit R 6.35 mm with 8mm shank

Spiral cutter Z1 Negative - Down cut for Plastics Suitable...

Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Dovetail bit HW D=13,5 A=13 degrees L=12,5 GL=44 S=8

Dovetail bit HW D=13,5 A=13 degrees L=12,5 GL=44 S=8

Face milling bit HW Z=2 D=20 L=13 GL=45 S=8

Face milling bit HW Z=2 D=20 L=13 GL=45 S=8

Engraving cutter for plastics Z1  Suitable for:...

Engraving cutter for plastics Z1  Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Side slotting cutter Shank 12 mm

Side slotting cutter Shank 12 mm

Side slotting cutter Shank 8 mm

Side slotting cutter Shank 8 mm

Rounding over cutter with guide pin shank 8 mm

Rounding over cutter with guide pin shank 8 mm

Rounding over cutter with bearing for solid surface materials

Rounding over cutter with bearing for solid surface materials

Finger pull Cutters

Finger pull Cutters

Finger pull Cutters

Finger pull Cutters

Finger pull Cutters

Finger pull Cutters

Hob cutter for solid surface

Hob cutter for solid surface