Filtrer par

Disponibilité

Diamètre du trou

Diamètre de connexion

Diamètre (D)

Longueur de coupe - hauteur

Longueur totale

Rayon/angle

Coupeurs

Fraises pour défonceuses

Programme complet Toupies professionnelles pour un résultat parfait.

Filtres actifs

  • Longueur de coupe - hauteur : 4mm
  • Longueur de coupe - hauteur : 17mm
BTL2 1,5x50 BTL2 1,5x50

BTL2 1,5x50

Convient pour : acier, acier inoxydable, fonte, aluminium,...

Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.

Prix 10,00 €
BTL2 3x60 BTL2 3x60

BTL2 3x60

Convient pour : acier, acier inoxydable, fonte, aluminium,...

Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.

Prix 11,00 €
Spiral cutter Z1 Negative - Down cut D1 L4 S3 mm

Spiral cutter Z1 Negative -...

Spiral cutter Z1 Negative - Down cut for Plastics Suitable...

Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Prix 30,60 € Prix de base 34,00 €
  • -10%
  • -10%
Spiral cutter Z1 Positive - Upcut D1 L4 S3mm

Spiral cutter Z1 Positive -...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Prix 30,60 € Prix de base 34,00 €
  • -10%
  • -10%
Spiral bit solid carbide 5 mm Two flute ENT 10024

Spiral bit solid carbide 5...

Two flute solid carbide spiral bit 5 mm with 8 mm shank....

Two flute solid carbide spiral bit 5 mm with 8 mm shank. Positive (upcut) spiral.

Prix 42,00 €
Ogee Cutter TC with Ball Bearing ENT 14892

Ogee Cutter TC with Ball...

Two flute ogee cutter with exchangeable ball bearing and 8mm...

Two flute ogee cutter with exchangeable ball bearing and 8mm shank

Prix 51,00 €
Engraving cutter for plastics Z1 90° D8 S8mm

Engraving cutter for...

Engraving cutter for plastics Z1  Suitable for:...

Engraving cutter for plastics Z1  Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Prix 58,50 € Prix de base 65,00 €
  • -10%
  • -10%
Rail- & Stile Cutter Chamfer TC. Type C 8 mm shank

Rail- & Stile Cutter...

Two flutes. With exchangeable ball bearing. The set combines a...

Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts. For woodthickness from 19 to 21 mm

Prix 93,00 €
Rail- & Stile Cutter Chamfer TC. Type B 8 mm shank

Rail- & Stile Cutter...

Two flutes. With exchangeable ball bearing. The set combines a...

Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts. For woodthickness from 19 to 21 mm

Prix 109,00 €
Rail- & Stile Cutter Chamfer TC. Type A 8 mm shank

Rail- & Stile Cutter...

ENT 17440 Rail- & Stile Cutter Chamfer TC. Type  A with 8...

ENT 17440 Rail- & Stile Cutter Chamfer TC. Type  A with 8 mm shank.  For woodthickness from 19 to 21 mm

Prix 119,00 €
Rail- & Stile Cutter Chamfer TC. Type C 12 mm shank

Rail- & Stile Cutter...

Two flutes. With exchangeable ball bearing. The set combines a...

Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts. For woodthickness from 19 to 21 mm

Prix 125,00 €
Retour en haut