Fraises pour défonceuses

Programme complet Toupies professionnelles pour un résultat parfait.

Filtres actifs

  • Longueur totale : 38 mm
  • Longueur totale : 52mm
Spiral cutter Positiv for Plastics D3 L12 S1/4 inch

Spiral cutter Positiv for...

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Prix 10,80 € Prix de base 12,00 €
  • -10%
  • -10%
Spiral cutter Negative for Plastics D2 L8 S3mm

Spiral cutter Negative for...

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Prix 13,50 € Prix de base 15,00 €
  • -10%
  • -10%
Spiral cutter Negative for Plastics D2,5 L10 S3mm

Spiral cutter Negative for...

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Prix 15,30 € Prix de base 17,00 €
  • -10%
  • -10%
Spiral cutter Positiv for Plastics D2,5 L10 S3mm

Spiral cutter Positiv for...

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Prix 15,30 € Prix de base 17,00 €
  • -10%
  • -10%
Spiral cutter Positiv for Plastics D3 L12 S3mm

Spiral cutter Positiv for...

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Prix 15,30 € Prix de base 17,00 €
  • -10%
  • -10%
Straight Cutter with Centre Tip 25 x 20 x 52 mm

Straight Cutter with Centre...

Straight cutter with two flutes for clean finish. For...

Straight cutter with two flutes for clean finish. For grooving, rebating and mortising. With TC centre tip. The TC centre tip is ideal for plunging and working in abrasive materials such as chipboard, MDF, plywood and hardwood.

Prix 49,00 €
Retour en haut