Filtrer par
Disponibilité
Diamètre de connexion
Diamètre (D)
Longueur de coupe - hauteur
Longueur totale
Rayon/angle
Coupeurs
Fraises pour défonceuses
Programme complet Toupies professionnelles pour un résultat parfait.
Straight Cutter TC Z1 D3...
ENT Straight Cutter TC / One Flute with 8 mm shank
ENT Straight Cutter TC / One Flute with 8 mm shank
VHKE 3,0x6x51
convient pour l'aluminium et les plastiques
convient pour l'aluminium et les plastiques
Straight Cutter TC Z2 D16...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Straight Cutter TC Z2 D18...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Straight Cutter TC Z2 D22...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Straight Cutter TC Z2 D24...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
copy of Straight bit D6 L16...
Straight bit shank 6 mm
Straight bit shank 6 mm
- -10%
- -10%
Straight bit 7mm L16 S8mm
Straight bit shank 8mm
Straight bit shank 8mm
- -10%
- -10%
Single flute cutter D8 S12...
Single flute cutter Z=1 for solid surface Suitable for...
Single flute cutter Z=1 for solid surface Suitable for Corian Hi-Macs Staron Avonite Hanex Varicor domovari
- -10%
- -10%
Single flute cutter Z2...
Single flute cutter Z=2 Negative for solid surface
Single flute cutter Z=2 Negative for solid surface
- -10%
- -10%
Single flute cutter 12,7mm...
Single flute cutter Z=1 for solid surface
Single flute cutter Z=1 for solid surface
- -10%
- -10%
Single flute cutter 10mm...
Single flute cutter Z=1 for solid surface
Single flute cutter Z=1 for solid surface
- -10%
- -10%
Side slotting cutter Z2...
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 8 mm
- -10%
- -10%
Side slotting cutter Z2...
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 8 mm
- -10%
- -10%
Cove mould cutter for solid...
Cove mould cutter for solid surface
Cove mould cutter for solid surface
- -10%
- -10%
Finger joint cutter FJS
Finger joint cutter FJS
Finger joint cutter FJS
- -10%
- -10%
Trimmer D12.7 L38 S12mm...
Bearing guide cutter with three cutting edges for particularly...
Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.
- -10%
- -10%