Fraises pour défonceuses

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=8

Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=8

Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=6mm

Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=6mm

Keyhole bit HW D=12,7 mm S=8

Keyhole bit HW D=12,7 mm S=8

Ballbearings diameter 16 mm and 12,7 mm included.

Ballbearings diameter 16 mm and 12,7 mm included.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8

Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8

Replacement tip bearing guide cutter. For coated boards, solid...

Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials

Ballbearings diameter 16 mm and 12,7 mm included.

Ballbearings diameter 16 mm and 12,7 mm included.

Profile cutter PC24

Profile cutter PC24

Profile cutter PC21

Profile cutter PC21