Fraises pour défonceuses

Programme complet Toupies professionnelles pour un résultat parfait.

Filtres actifs

  • Longueur totale : 67mm
  • Longueur totale : 78mm
EPROCUT EPROCUT Top bearing straight bit HW Z2 D16 L20 GL67 S8

EPROCUT EPROCUT Top bearing...

EPROCUT EPROCUT Top bearing straight bit HW Z=2 D=16 L=20...

EPROCUT EPROCUT Top bearing straight bit HW Z=2 D=16 L=20 GL=67 S=8

Prix 25,20 € Prix de base 28,00 €
  • -10%
  • -10%
Arbor for Groovers 6,35mm S12mm

Arbor for Groovers 6,35mm...

Arbor inclusive spacers and bearing no. B16 (D = 16). Suitable...

Arbor inclusive spacers and bearing no. B16 (D = 16). Suitable for groovers with bore 6,35 mm

Prix 27,00 € Prix de base 30,00 €
  • -10%
  • -10%
Trimmer D18 S12mm negative axis angle Trimmer D18 S12mm negative axis angle

Trimmer D18 S12mm...

This results in a particularly clean result with thin coatings...

This results in a particularly clean result with thin coatings and long-fiber funnels.

Prix 45,90 € Prix de base 51,00 €
  • -10%
  • -10%
Trimmer D12.7 L38 S8mm with double bearing

Trimmer D12.7 L38 S8mm...

Bearing guide cutter with three cutting edges for particularly...

Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.

Prix 98,10 € Prix de base 109,00 €
  • -10%
  • -10%
Retour en haut