Reduction sleeve 10-12 MM
Reduction sleeve 10-12mm
Reduction sleeve 10-12mm
- -10%
- -10%
Filtrer par
Disponibilité
Diamètre interieur
Diamètre extérieur
Diamètre de connexion
Diamètre (D)
Longueur de coupe - hauteur
Longueur totale
Rayon/angle
Coupeurs
Programme complet Toupies professionnelles pour un résultat parfait.
Il y a 18 produits.
Reduction sleeve 10-12mm
Reduction sleeve 10-12mm
Reduction sleeve 8-12 mm
Reduction sleeve 8-12 mm
Reduction sleeve 8 - 10 mm
Reduction sleeve 8 - 10 mm
Reduction sleeve 6 - 12 mm
Reduction sleeve 6 - 12 mm
Reduction sleeve 6 -10 mm
Reduction sleeve 6 -10 mm
Reduction sleeve 6 - 8mm
Reduction sleeve 6 - 8mm
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank
ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank
ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank
ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank
ENT trimming cutter TC 9.5 x 25.4 x 68 mm with 8mm shank
ENT trimming cutter TC 9.5 x 25.4 x 68 mm with 8mm shank
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Half round profile cutter
Half round profile cutter
Fraise pour poignée encastrée à deux arêtes de coupe pour le...
Fraise pour poignée encastrée à deux arêtes de coupe pour le fraisage de poignées dans les façades de cuisine et autres meubles par exemple. Coupe frontale et périphérique.