Fraises pour défonceuses

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Convient à: Acier, Acier inoxydable et cuivre

Convient à: Acier, Acier inoxydable et cuivre

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Convient pour : aluminium, cuivre, plastiques

Convient pour : aluminium, cuivre, plastiques

ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank

ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank

ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank

ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank

EPROCUT Top bearing straight bits HW Z=2 D=16 L=25 GL=72 S=8

EPROCUT Top bearing straight bits HW Z=2 D=16 L=25 GL=72 S=8

ENT trimming cutter TC 9.5 x 25.4 x 68 mm with 8mm shank

ENT trimming cutter TC 9.5 x 25.4 x 68 mm with 8mm shank

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Weather strip cutter Straight double

Weather strip cutter Straight double

T-Slot cutter

T-Slot cutter

for simultaneous machining of top and bottom edges. For...

for simultaneous machining of top and bottom edges. For material thickness up to 30 mm thickness.

Half round profile cutter

Half round profile cutter

Tenoning cutter for repair work on solid surface material

Tenoning cutter for repair work on solid surface material

For folding, profiling and formatting in one operation.

For folding, profiling and formatting in one operation.

For folding, profiling and formatting in one operation.

For folding, profiling and formatting in one operation.

Tenoning cutter for repair work on solid surface material

Tenoning cutter for repair work on solid surface material

Fraise pour poignée encastrée à deux arêtes de coupe pour le...

Fraise pour poignée encastrée à deux arêtes de coupe pour le fraisage de poignées dans les façades de cuisine et autres meubles par exemple. Coupe frontale et périphérique.

Tenoning cutter for repair work on solid surface material

Tenoning cutter for repair work on solid surface material

Tenoning cutter for repair work on solid surface material

Tenoning cutter for repair work on solid surface material