- Home
-
- Fraises pour défonceuses
- Pour le travail du bois
- Fraises à rayon concave
- Fraises à bords droits pour canaux
- Fraises à mortaiser
- Fraises pour joints flexibles
- Fraises à chanfreiner
- Fraises à queue d'aronde
- Fraises à arêtes de coupe axiales
- Fraises à canal droit double
- Fraises hélicoïdales
- Coupe-bordure droite pour couper
- Coupe-disques
- Emporte-pièces demi-ronds
- Fraises à encoche en V
- Cutter à bords droits pour poser les joints de fenêtres et de portes
- Fraises à rainure en T
- Coupe-doigts / Coupe-main courante
- Fraises à rayon convexe
- Fraises pour joints à rainure et languette
- Coupe-étapes
- Coupeur pour portes
- Coupe-tours d'orge
- Fraises profilées
- cutters pour collage adhésif
- Fraises pour corian / HIMACS
- Fraises pour plastiques
- Fraises pour métal
- Fraises pour aluminium, ALUCOBOND, DiBOND, REYNOBOND
- Fraises pour fenêtres et portes
- Fraises diamantées polycristallines
- Composants
- Pinces et accessoires
- Pour le travail du bois
- Porte-outils
- Porte-outils à rainurer
- Têtes de coupe quart de rond
- Têtes de coupe à jointoyer
- Tête de coupe pour biseaux
- Tête de coupe à panneaux surélevée
- Têtes de coupe à remise
- Porte-outils pour cadres de fenêtres
- Porte-outils profil-contre-profil
- Porte-outils à rainure et languette
- Planification des têtes de coupe
- Autres têtes de coupe
- Composants
- Porte-outils pour machines Biesse
- Couteaux interchangeables
- Lames Circulaires
- Mèches pour perceuses
- Roulements
- Diamètre intérieur jusqu'à 10 mm
- Diamètre intérieur 1,5mm
- Diamètre intérieur 2 mm
- Diamètre intérieur 2,38mm - 3/32 inch
- Diamètre intérieur 2,5 mm
- Diamètre intérieur 3 mm
- Diamètre intérieur 3,17mm - 1/8 inch
- Diamètre intérieur 4mm
- Diamètre intérieur 4,75mm - 3/16 inch
- Diamètre intérieur 5mm
- Diamètre intérieur 6mm
- Diamètre intérieur 6,35mm - 1/4 inch
- Diamètre intérieur 7mm
- Diamètre intérieur 7,94mm - 5/16 inch
- Diamètre intérieur 8mm
- Diamètre intérieur 9mm
- Diamètre intérieur 9,52mm - 3/8 inch
- Diamètre intérieur de 10 à 20mm
- Diamètre intérieur 20 mm et plus
- Diamètre intérieur jusqu'à 10 mm
- Virutex
- Machines
- Accessoires
- Consommables
- Composants
- AB11C Pièces
- AB111N Parts
- AB181 Parts
- AG98 parts
- AP98 Parts
- Pièces pour machines CE
- Pièces pour machines EB
- FC116U Parts
- FC16S Parts
- FP192VB Parts
- Pièces pour machines FR
- LB31E Parts
- LRE46L Parts
- LRT84H Parts
- M75 Parts
- O81 N Parts
- PEB50, PEB250 Parts
- RA17 Parts
- RTE46L Parts
- Pièces pour machines TM
- RZ170N Parts
- RZ70M Parts
- Other parts
- Autres produits
- Sale
- Fraises pour défonceuses
Filtrer par
Disponibilité
Diamètre de connexion
Diamètre (D)
Longueur de coupe - hauteur
Longueur totale
Rayon/angle
Coupeurs
Fraises pour défonceuses
Programme complet Toupies professionnelles pour un résultat parfait.
Il y a 23 produits.
Spiral cutter Positiv for...
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
- -10%
- -10%
Spiral cutter Negative for...
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
- -10%
- -10%
Spiral cutter Negative for...
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
- -10%
- -10%
Spiral cutter Positiv for...
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
- -10%
- -10%
Spiral cutter Positiv for...
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
- -10%
- -10%
Single flute cutter D10...
Single flute cutter with neck for plastic and aluminium
Single flute cutter with neck for plastic and aluminium
- -10%
- -10%
Straight bit D12 L50 S12mm
Straight bit shank 12 mm
Straight bit shank 12 mm
- -10%
- -10%
Bevel cutter with beveled...
For edging sinks and vanity bowls. The special taper on the...
For edging sinks and vanity bowls. The special taper on the Bearing sleeve allows for perfect guide following around the inside of the bowl.
- -10%
- -10%
PCD Diamond straight router...
PCD Diamond straight router bit bottom cutting
PCD Diamond straight router bit bottom cutting
Bevel cutter 6° with...
For edging sinks and vanity bowls. The special taper on the...
For edging sinks and vanity bowls. The special taper on the Bearing sleeve allows for perfect guide following around the inside of the bowl.
- -10%
- -10%
Bevel cutter 15° S12mm...
Bevel cutter with bearing for solid surface
Bevel cutter with bearing for solid surface
- -10%
- -10%
Straight cutter D18 L60...
Straight cutter internal thread M10x1.5
Straight cutter internal thread M10x1.5
- -10%
- -10%
PCD Diamond straight router...
PCD Diamond straight router bit bottom cutting
PCD Diamond straight router bit bottom cutting
PCD Diamond straight router...
PCD Diamond straight router bit bottom cutting
PCD Diamond straight router bit bottom cutting
Trimmers with bearing...
Trimmers with bearing
Trimmers with bearing
- -10%
- -10%
Bevel cutter 45° S12mm...
Bevel cutter with bearing for solid surface
Bevel cutter with bearing for solid surface
- -10%
- -10%
Rounding over cutter R19...
Rounding over cutter with bearing for solid surface materials
Rounding over cutter with bearing for solid surface materials
- -10%
- -10%
Bevel cutter R3,5 7°...
Bevel cutter with beveled bearing for solid surface
Bevel cutter with beveled bearing for solid surface
- -10%
- -10%
Fraise à chanfrein R12.7...
Fraise à chanfreiner avec butées coniques pour matériaux à...
Fraise à chanfreiner avec butées coniques pour matériaux à surface solide Convient à Corian Hi-Macs Staron Avonite Hanex Varicor domovari
- -10%
- -10%
Nesting ECO Z3+1 16x35 S16mm
For CNC machines For Cabinet nesting Machinig operations on...
For CNC machines For Cabinet nesting Machinig operations on MDF and melamine DP plunging Tip Sharpening area 2.0 mm heavy metal body Feed speed up to 20m/min
- -20%
- -20%