AB2 5,0x50
Convient pour : aluminium, cuivre, plastiques
Convient pour : aluminium, cuivre, plastiques
Filtrer par
Disponibilité
Diamètre extérieur
Diamètre de connexion
Diamètre (D)
Longueur de coupe - hauteur
Longueur totale
Rayon/angle
Coupeurs
Programme complet Toupies professionnelles pour un résultat parfait.
Il y a 25 produits.
Convient pour : aluminium, cuivre, plastiques
Convient pour : aluminium, cuivre, plastiques
Convient pour : acier, acier inoxydable, fonte, aluminium,...
Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.
Convient pour : acier, acier inoxydable, fonte, aluminium,...
Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.
Convient pour : acier, acier inoxydable, fonte, aluminium,...
Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.
Convient pour : acier, acier inoxydable, fonte, aluminium,...
Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.
Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8
Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8
Dovetail bit HW Z=2 D=14 A=10° L=12 GL=49 S=8mm
Dovetail bit HW Z=2 D=14 A=10° L=12 GL=49 S=8mm
Dovetail bit HW Z=2 D=12 A=10° L=10 GL=46 S=8
Dovetail bit HW Z=2 D=12 A=10° L=10 GL=46 S=8
all nose Spiral cutter Z1 Positive - Upcut for Plastics...
all nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10
Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10
Dovetail bit HW Z=2 D=20 A=10° L=16 GL=52 S=8
Dovetail bit HW Z=2 D=20 A=10° L=16 GL=52 S=8
Bevel cutter with real center cutting edge for direct...
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Profile cutter OG D9,5 S8mm
Profile cutter OG D9,5 S8mm
Bevel cutter with high cutting length
Bevel cutter with high cutting length
Bevel cutter with high cutting length
Bevel cutter with high cutting length
Bevel cutter with bearing and high cutting length
Bevel cutter with bearing and high cutting length
Bevel cutter with bearing and high cutting length
Bevel cutter with bearing and high cutting length
Double rounding cutter with bearing
Double rounding cutter with bearing
Double rounding over / chamfer bit adjustable HW Z=2+2 D=22...
Double rounding over / chamfer bit adjustable HW Z=2+2 D=22 R=2,5 A=45 degrees Shank 12 mm
Double rounding over / chamfer bit adjustable HW Z=2+2 D=22...
Double rounding over / chamfer bit adjustable HW Z=2+2 D=22 R=2,5 A=45 degrees shank 8 mm