Fraises pour défonceuses

JVL pro-line roundnose bit D 19 mm

JVL pro-line roundnose bit D 19 mm

Convient pour : aluminium, cuivre, plastiques

Convient pour : aluminium, cuivre, plastiques

Diameter 31.8mm R 9.5mm

Diameter 31.8mm R 9.5mm

Convient pour : acier, acier inoxydable, fonte, aluminium,...

Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.

JVL pro-line rounding over bit 31.8mm

JVL pro-line rounding over bit 31.8mm

Convient pour : acier, acier inoxydable, fonte, aluminium,...

Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.

Convient pour : acier, acier inoxydable, fonte, aluminium,...

Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.

Convient pour : acier, acier inoxydable, fonte, aluminium,...

Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.

EPROCUT Rounding over bit HW Z=2 D=31,7 R=9,5 L=16 GL=48 S=8

EPROCUT Rounding over bit HW Z=2 D=31,7 R=9,5 L=16 GL=48 S=8

all nose Spiral cutter Z1 Positive - Upcut for Plastics...

all nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Profile cutter OG D9,5  S8mm

Profile cutter OG D9,5  S8mm

Radius engraving cutter These double-edged cutters create a...

Radius engraving cutter These double-edged cutters create a flat of approx. 1 mm at the bottom.

Rounding over cutter with guide pin shank 8 mm

Rounding over cutter with guide pin shank 8 mm

Profile cutter TRC19

Profile cutter TRC19

Cove mould cutter for solid surface

Cove mould cutter for solid surface

Guttering cutter for solid surface

Guttering cutter for solid surface

Double rounding cutter with bearing

Double rounding cutter with bearing

Titman Staff / corner bead bit with bearing HW Z=2 D=38 L=28...

Titman Staff / corner bead bit with bearing HW Z=2 D=38 L=28 R=9,5 S=8

Double rounding over / chamfer bit adjustable HW Z=2+2 D=22...

Double rounding over / chamfer bit adjustable HW Z=2+2 D=22 R=2,5 A=45 degrees Shank 12 mm

Double rounding over / chamfer bit adjustable HW Z=2+2 D=22...

Double rounding over / chamfer bit adjustable HW Z=2+2 D=22 R=2,5 A=45 degrees shank 8 mm

Profile cutter RBB

Profile cutter RBB